| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in Duende IdentityServer 4. The affected element is an unknown function of the file /connect/authorize of the component Token Renewal Endpoint. This manipulation of the argument id_token_hint causes improper authentication. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is described as difficult. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in TRENDnet TEW-824DRU 1.010B01/1.04B01. The impacted element is the function sub_420A78 of the file apply_sec.cgi of the component Web Interface. Such manipulation of the argument Language leads to cross site scripting. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Portabilis i-Educar 2.11. This impacts an unknown function of the file /intranet/educar_servidor_curso_lst.php of the component Endpoint. Performing a manipulation of the argument Name results in cross site scripting. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A specially crafted aggregation query with $lookup by an authenticated user with write privileges can cause a double-free or use-after-free memory issue in the slot-based execution (SBE) engine when an in-memory hash table is spilled to disk. |
| A flaw was identified in Keycloak, an identity and access management solution, where it improperly follows HTTP redirects when processing certain client configuration requests. This behavior allows an attacker to trick the server into making unintended requests to internal or restricted resources. As a result, sensitive internal services such as cloud metadata endpoints could be accessed. This issue may lead to information disclosure and enable attackers to map internal network infrastructure. |
| IBM Planning Analytics Local 2.1.0 through 2.1.17 could allow an attacker to trick the caching mechanism into storing and serving sensitive, user-specific responses as publicly cacheable resources. |
| The Yoast Duplicate Post plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the clone_bulk_action_handler() and republish_request() functions in all versions up to, and including, 4.5. This makes it possible for authenticated attackers, with Contributor-level access and above, to duplicate any post on the site including private, draft, and trashed posts they shouldn't have access to. Additionally, attackers with Author-level access and above can use the Rewrite & Republish feature to overwrite any published post with their own content. |
| The [CR]Paid Link Manager plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the URL path in all versions up to, and including, 0.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Subscriptions for WooCommerce plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `wps_sfw_admin_cancel_susbcription()` function in all versions up to, and including, 1.9.2. This is due to the function being hooked to the `init` action without any authentication or authorization checks, and only performing a non-empty check on the nonce parameter without actually validating it via `wp_verify_nonce()`. This makes it possible for unauthenticated attackers to cancel any active WooCommerce subscription by sending a crafted GET request with an arbitrary nonce value via the `wps_subscription_id` parameter. |
| OpenClaw versions prior to 2026.2.22 with the optional BlueBubbles plugin contain an access control bypass vulnerability where empty allowFrom configuration causes dmPolicy pairing and allowlist restrictions to be ineffective. Remote attackers can send direct messages to BlueBubbles accounts by exploiting the misconfigured allowlist validation logic to bypass intended sender authorization checks. |
| A flaw was found in Keycloak. An unauthenticated remote attacker can trigger an application level Denial of Service (DoS) by sending a highly compressed SAMLRequest through the SAML Redirect Binding. The server fails to enforce size limits during DEFLATE decompression, leading to an OutOfMemoryError (OOM) and subsequent process termination. This vulnerability allows an attacker to disrupt the availability of the service. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gate: snapshot parameters with RCU on replace
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: secure_seq: add back ports to TS offset
This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets")
tcp_tw_recycle went away in 2017.
Zhouyan Deng reported off-path TCP source port leakage via
SYN cookie side-channel that can be fixed in multiple ways.
One of them is to bring back TCP ports in TS offset randomization.
As a bonus, we perform a single siphash() computation
to provide both an ISN and a TS offset. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
| Perle IOLAN STS/SCS terminal server models with firmware versions prior to 6.0 allow authenticated OS command injection via the restricted shell accessed over Telnet or SSH. The shell 'ps' command does not perform proper argument sanitization and passes user-supplied parameters into an 'sh -c' invocation running as root. An authenticated attacker who can log in to the device can inject shell metacharacters after the 'ps' subcommand to execute arbitrary OS commands with root privileges, leading to full compromise of the underlying operating system. |
| ### Impact
Spinnaker updated URL Validation logic on user input to provide sanitation on user inputted URLs for clouddriver. However, they missed that Java URL objects do not correctly handle underscores on parsing. This led to a bypass of the previous CVE (CVE-2025-61916) through the use of carefully crafted URLs. Note, Spinnaker found this not just in that CVE, but in the existing URL validations in Orca fromUrl expression handling. This CVE impacts BOTH artifacts as a result.
### Patches
This has been merged and will be available in versions 2025.4.1, 2025.3.1, 2025.2.4 and 2026.0.0.
### Workarounds
You can disable the various artifacts on this system to work around these limits. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, a privilege escalation vulnerability exists in the Wazuh Manager's cluster synchronization protocol. The `wazuh-clusterd` service allows authenticated nodes to write arbitrary files to the manager’s file system with the permissions of the `wazuh` system user. Due to insecure default permissions, the `wazuh` user has write access to the manager's main configuration file (`/var/ossec/etc/ossec.conf`). By leveraging the cluster protocol to overwrite `ossec.conf`, an attacker can inject a malicious `<localfile>` command block. The `wazuh-logcollector` service, which runs as root, parses this configuration and executes the injected command. This chain allows an attacker with cluster credentials to gain full Root Remote Code Execution, violating the principle of least privilege and bypassing the intended security model. Version 4.14.3 fixes the issue. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 4.3.0 and prior to version 4.14.3, a Denial of Service (DoS) vulnerability exists in the Wazuh API authentication middleware (`middlewares.py`). The application uses an asynchronous event loop (Starlette/Asyncio) to call a synchronous function (`generate_keypair`) that performs blocking disk I/O on every request containing a Bearer token. An unauthenticated remote attacker can exploit this by flooding the API with requests containing invalid Bearer tokens. This forces the single-threaded event loop to pause for file read operations repeatedly, starving the application of CPU resources and potentially preventing it from accepting or processing legitimate connections. Version 4.14.3 fixes the issue. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 4.4.0 and prior to version 4.14.3, a stack-based buffer overflow vulnerability exists in the Wazuh Database synchronization module (`wdb_delta_event.c`). The SQL query construction logic allows for an integer underflow when calculating the remaining buffer size. This occurs because the code incorrectly aggregates the return value of `snprintf`. If a specific database synchronization payload exceeds the size of the query buffer (2048 bytes), the size calculation wraps around to a massive integer, effectively removing bounds checking for subsequent writes. This allows an attacker to corrupt the stack, leading to a Denial of Service (DoS) or potentially RCE. Version 4.14.3 fixes the issue. |
| pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 0.14.0 and prior to version 26.0.0, if a user provided callback to `set_tlsext_servername_callback` raised an unhandled exception, this would result in a connection being accepted. If a user was relying on this callback for any security-sensitive behavior, this could allow bypassing it. Starting in version 26.0.0, unhandled exceptions now result in rejecting the connection. |
