| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready()
When the socket is closed while in TCP_LISTEN a callback is run to
flush all outstanding packets, which in turns calls
nvmet_tcp_listen_data_ready() with the sk_callback_lock held.
So we need to check if we are in TCP_LISTEN before attempting
to get the sk_callback_lock() to avoid a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: ocb: skip rx_no_sta when interface is not joined
ieee80211_ocb_rx_no_sta() assumes a valid channel context, which is only
present after JOIN_OCB.
RX may run before JOIN_OCB is executed, in which case the OCB interface
is not operational. Skip RX peer handling when the interface is not
joined to avoid warnings in the RX path. |
| In the Linux kernel, the following vulnerability has been resolved:
linkwatch: use __dev_put() in callers to prevent UAF
After linkwatch_do_dev() calls __dev_put() to release the linkwatch
reference, the device refcount may drop to 1. At this point,
netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an
empty list and returns without blocking), wait for the refcount to
become 1 via netdev_wait_allrefs_any(), and then free the device
via kobject_put().
This creates a use-after-free when __linkwatch_run_queue() tries to
call netdev_unlock_ops() on the already-freed device.
Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in
netdev_run_todo() before kobject_put() would not work, because
netdev_lock_ops() is conditional - it only locks when
netdev_need_ops_lock() returns true. If the device doesn't require
ops_lock, linkwatch won't hold any lock, and netdev_run_todo()
acquiring the lock won't provide synchronization.
Fix this by moving __dev_put() from linkwatch_do_dev() to its
callers. The device reference logically pairs with de-listing the
device, so it's reasonable for the caller that did the de-listing
to release it. This allows placing __dev_put() after all device
accesses are complete, preventing UAF.
The bug can be reproduced by adding mdelay(2000) after
linkwatch_do_dev() in __linkwatch_run_queue(), then running:
ip tuntap add mode tun name tun_test
ip link set tun_test up
ip link set tun_test carrier off
ip link set tun_test carrier on
sleep 0.5
ip tuntap del mode tun name tun_test
KASAN report:
==================================================================
BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123
CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events_unbound linkwatch_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x156/0x4c9 mm/kasan/report.c:482
kasan_report+0xdf/0x1a0 mm/kasan/report.c:595
netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
__linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304
process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x5da/0xe40 kernel/workqueue.c:3421
kthread+0x3b3/0x730 kernel/kthread.c:463
ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domains
Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
procfs: avoid fetching build ID while holding VMA lock
Fix PROCMAP_QUERY to fetch optional build ID only after dropping mmap_lock
or per-VMA lock, whichever was used to lock VMA under question, to avoid
deadlock reported by syzbot:
-> #1 (&mm->mmap_lock){++++}-{4:4}:
__might_fault+0xed/0x170
_copy_to_iter+0x118/0x1720
copy_page_to_iter+0x12d/0x1e0
filemap_read+0x720/0x10a0
blkdev_read_iter+0x2b5/0x4e0
vfs_read+0x7f4/0xae0
ksys_read+0x12a/0x250
do_syscall_64+0xcb/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&sb->s_type->i_mutex_key#8){++++}-{4:4}:
__lock_acquire+0x1509/0x26d0
lock_acquire+0x185/0x340
down_read+0x98/0x490
blkdev_read_iter+0x2a7/0x4e0
__kernel_read+0x39a/0xa90
freader_fetch+0x1d5/0xa80
__build_id_parse.isra.0+0xea/0x6a0
do_procmap_query+0xd75/0x1050
procfs_procmap_ioctl+0x7a/0xb0
__x64_sys_ioctl+0x18e/0x210
do_syscall_64+0xcb/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&mm->mmap_lock);
lock(&sb->s_type->i_mutex_key#8);
lock(&mm->mmap_lock);
rlock(&sb->s_type->i_mutex_key#8);
*** DEADLOCK ***
This seems to be exacerbated (as we haven't seen these syzbot reports
before that) by the recent:
777a8560fd29 ("lib/buildid: use __kernel_read() for sleepable context")
To make this safe, we need to grab file refcount while VMA is still locked, but
other than that everything is pretty straightforward. Internal build_id_parse()
API assumes VMA is passed, but it only needs the underlying file reference, so
just add another variant build_id_parse_file() that expects file passed
directly.
[akpm@linux-foundation.org: fix up kerneldoc] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Prevent excessive number of frames
In this case, the user constructed the parameters with maxpacksize 40
for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer
size for each data URB is maxpacksize * packets, which in this example
is 40 * 6 = 240; When the user performs a write operation to send audio
data into the ALSA PCM playback stream, the calculated number of frames
is packsize[0] * packets = 264, which exceeds the allocated URB buffer
size, triggering the out-of-bounds (OOB) issue reported by syzbot [1].
Added a check for the number of single data URB frames when calculating
the number of frames to prevent [1].
[1]
BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487
Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506
Call Trace:
copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487
prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611
prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: handle changing device dma map requirements
The initial state of dma_needs_unmap may be false, but change to true
while mapping the data iterator. Enabling swiotlb is one such case that
can change the result. The nvme driver needs to save the mapped dma
vectors to be unmapped later, so allocate as needed during iteration
rather than assume it was always allocated at the beginning. This fixes
a NULL dereference from accessing an uninitialized dma_vecs when the
device dma unmapping requirements change mid-iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix NULL pointer dereference in ceph_mds_auth_match()
The CephFS kernel client has regression starting from 6.18-rc1.
We have issue in ceph_mds_auth_match() if fs_name == NULL:
const char fs_name = mdsc->fsc->mount_options->mds_namespace;
...
if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) {
/ fsname mismatch, try next one */
return 0;
}
Patrick Donnelly suggested that: In summary, we should definitely start
decoding `fs_name` from the MDSMap and do strict authorizations checks
against it. Note that the `-o mds_namespace=foo` should only be used for
selecting the file system to mount and nothing else. It's possible
no mds_namespace is specified but the kernel will mount the only
file system that exists which may have name "foo".
This patch reworks ceph_mdsmap_decode() and namespace_equals() with
the goal of supporting the suggested concept. Now struct ceph_mdsmap
contains m_fs_name field that receives copy of extracted FS name
by ceph_extract_encoded_string(). For the case of "old" CephFS file
systems, it is used "cephfs" name.
[ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(),
get rid of a series of strlen() calls in ceph_namespace_match(),
drop changes to namespace_equals() body to avoid treating empty
mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap()
as namespace_equals() isn't an equivalent substitution there ] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c569 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Sanitize syscall table indexing under speculation
The syscall number is a user-controlled value used to index into the
syscall table. Use array_index_nospec() to clamp this value after the
bounds check to prevent speculative out-of-bounds access and subsequent
data leakage via cache side channels. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: prevent ZERO_SIZE_PTR dereference when num_ifs is zero
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: fix memory leak in acp3x pdm dma ops |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: sync read disk super and set block size
When the user performs a btrfs mount, the block device is not set
correctly. The user sets the block size of the block device to 0x4000
by executing the BLKBSZSET command.
Since the block size change also changes the mapping->flags value, this
further affects the result of the mapping_min_folio_order() calculation.
Let's analyze the following two scenarios:
Scenario 1: Without executing the BLKBSZSET command, the block size is
0x1000, and mapping_min_folio_order() returns 0;
Scenario 2: After executing the BLKBSZSET command, the block size is
0x4000, and mapping_min_folio_order() returns 2.
do_read_cache_folio() allocates a folio before the BLKBSZSET command
is executed. This results in the allocated folio having an order value
of 0. Later, after BLKBSZSET is executed, the block size increases to
0x4000, and the mapping_min_folio_order() calculation result becomes 2.
This leads to two undesirable consequences:
1. filemap_add_folio() triggers a VM_BUG_ON_FOLIO(folio_order(folio) <
mapping_min_folio_order(mapping)) assertion.
2. The syzbot report [1] shows a null pointer dereference in
create_empty_buffers() due to a buffer head allocation failure.
Synchronization should be established based on the inode between the
BLKBSZSET command and read cache page to prevent inconsistencies in
block size or mapping flags before and after folio allocation.
[1]
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:create_empty_buffers+0x4d/0x480 fs/buffer.c:1694
Call Trace:
folio_create_buffers+0x109/0x150 fs/buffer.c:1802
block_read_full_folio+0x14c/0x850 fs/buffer.c:2403
filemap_read_folio+0xc8/0x2a0 mm/filemap.c:2496
do_read_cache_folio+0x266/0x5c0 mm/filemap.c:4096
do_read_cache_page mm/filemap.c:4162 [inline]
read_cache_page_gfp+0x29/0x120 mm/filemap.c:4195
btrfs_read_disk_super+0x192/0x500 fs/btrfs/volumes.c:1367 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra: Fix a memory leak in tegra_slink_probe()
In tegra_slink_probe(), when platform_get_irq() fails, it directly
returns from the function with an error code, which causes a memory leak.
Replace it with a goto label to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue()
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't clobber irqfd routing type when deassigning irqfd
When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's
routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86
and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to
handle a concurrent routing update, verify that the irqfd is still active
before consuming the routing information. As evidenced by the x86 and
arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below),
clobbering the entry type without notifying arch code is surprising and
error prone.
As a bonus, checking that the irqfd is active provides a convenient
location for documenting _why_ KVM must not consume the routing entry for
an irqfd that is in the process of being deassigned: once the irqfd is
deleted from the list (which happens *before* the eventfd is detached), it
will no longer receive updates via kvm_irq_routing_update(), and so KVM
could deliver an event using stale routing information (relative to
KVM_SET_GSI_ROUTING returning to userspace).
As an even better bonus, explicitly checking for the irqfd being active
fixes a similar bug to the one the clobbering is trying to prevent: if an
irqfd is deactivated, and then its routing is changed,
kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing()
(because the irqfd isn't in the list). And so if the irqfd is in bypass
mode, IRQs will continue to be posted using the old routing information.
As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type
results in KVM incorrectly keeping the IRQ in bypass mode, which is
especially problematic on AMD as KVM tracks IRQs that are being posted to
a vCPU in a list whose lifetime is tied to the irqfd.
Without the help of KASAN to detect use-after-free, the most common
sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to
the memory for irqfd structure being re-allocated and zeroed, resulting
in irqfd->irq_bypass_data being NULL when read by
avic_update_iommu_vcpu_affinity():
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:amd_iommu_update_ga+0x19/0xe0
Call Trace:
<TASK>
avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd]
__avic_vcpu_load+0xf4/0x130 [kvm_amd]
kvm_arch_vcpu_load+0x89/0x210 [kvm]
vcpu_load+0x30/0x40 [kvm]
kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm]
kvm_vcpu_ioctl+0x571/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46893b
</TASK>
---[ end trace 0000000000000000 ]---
If AVIC is inhibited when the irfd is deassigned, the bug will manifest as
list corruption, e.g. on the next irqfd assignment.
list_add corruption. next->prev should be prev (ffff8d474d5cd588),
but was 0000000000000000. (next=ffff8d8658f86530).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:__list_add_valid_or_report+0x97/0xc0
Call Trace:
<TASK>
avic_pi_update_irte+0x28e/0x2b0 [kvm_amd]
kvm_pi_update_irte+0xbf/0x190 [kvm]
kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm]
irq_bypass_register_consumer+0xcd/0x170 [irqbypa
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: add bounds check for if_id in IRQ handler
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix memory leak in smb2_open_file()
Reproducer:
1. server: directories are exported read-only
2. client: mount -t cifs //${server_ip}/export /mnt
3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct
4. client: umount /mnt
5. client: sleep 1
6. client: modprobe -r cifs
The error message is as follows:
=============================================================================
BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Object 0x00000000d47521be @offset=14336
...
WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577
...
Call Trace:
<TASK>
kmem_cache_destroy+0x94/0x190
cifs_destroy_request_bufs+0x3e/0x50 [cifs]
cleanup_module+0x4e/0x540 [cifs]
__se_sys_delete_module+0x278/0x400
__x64_sys_delete_module+0x5f/0x70
x64_sys_call+0x2299/0x2ff0
do_syscall_64+0x89/0x350
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs]
WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577 |
