| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
Blamed commit did not take care of VLAN encapsulations
as spotted by syzbot [1].
Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull().
[1]
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321
ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729
__ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860
ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903
gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1
ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500
ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:318 [inline]
ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core net/core/dev.c:6139 [inline]
__netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252
netif_receive_skb_internal net/core/dev.c:6338 [inline]
netif_receive_skb+0x57/0x630 net/core/dev.c:6397
tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485
tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xbe2/0x15d0 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746
x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4960 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315
kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586
__alloc_skb+0x805/0x1040 net/core/skbuff.c:690
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712
sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995
tun_alloc_skb drivers/net/tun.c:1461 [inline]
tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xbe2/0x15d0 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746
x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 |
| In the Linux kernel, the following vulnerability has been resolved:
lib/buildid: use __kernel_read() for sleepable context
Prevent a "BUG: unable to handle kernel NULL pointer dereference in
filemap_read_folio".
For the sleepable context, convert freader to use __kernel_read() instead
of direct page cache access via read_cache_folio(). This simplifies the
faultable code path by using the standard kernel file reading interface
which handles all the complexity of reading file data.
At the moment we are not changing the code for non-sleepable context which
uses filemap_get_folio() and only succeeds if the target folios are
already in memory and up-to-date. The reason is to keep the patch simple
and easier to backport to stable kernels.
Syzbot repro does not crash the kernel anymore and the selftests run
successfully.
In the follow up we will make __kernel_read() with IOCB_NOWAIT work for
non-sleepable contexts. In addition, I would like to replace the
secretmem check with a more generic approach and will add fstest for the
buildid code. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: fix possible UAF in macvlan_forward_source()
Add RCU protection on (struct macvlan_source_entry)->vlan.
Whenever macvlan_hash_del_source() is called, we must clear
entry->vlan pointer before RCU grace period starts.
This allows macvlan_forward_source() to skip over
entries queued for freeing.
Note that macvlan_dev are already RCU protected, as they
are embedded in a standard netdev (netdev_priv(ndev)).
https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix memory leak in skb_segment_list for GRO packets
When skb_segment_list() is called during packet forwarding, it handles
packets that were aggregated by the GRO engine.
Historically, the segmentation logic in skb_segment_list assumes that
individual segments are split from a parent SKB and may need to carry
their own socket memory accounting. Accordingly, the code transfers
truesize from the parent to the newly created segments.
Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this
truesize subtraction in skb_segment_list() was valid because fragments
still carry a reference to the original socket.
However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed
this behavior by ensuring that fraglist entries are explicitly
orphaned (skb->sk = NULL) to prevent illegal orphaning later in the
stack. This change meant that the entire socket memory charge remained
with the head SKB, but the corresponding accounting logic in
skb_segment_list() was never updated.
As a result, the current code unconditionally adds each fragment's
truesize to delta_truesize and subtracts it from the parent SKB. Since
the fragments are no longer charged to the socket, this subtraction
results in an effective under-count of memory when the head is freed.
This causes sk_wmem_alloc to remain non-zero, preventing socket
destruction and leading to a persistent memory leak.
The leak can be observed via KMEMLEAK when tearing down the networking
environment:
unreferenced object 0xffff8881e6eb9100 (size 2048):
comm "ping", pid 6720, jiffies 4295492526
backtrace:
kmem_cache_alloc_noprof+0x5c6/0x800
sk_prot_alloc+0x5b/0x220
sk_alloc+0x35/0xa00
inet6_create.part.0+0x303/0x10d0
__sock_create+0x248/0x640
__sys_socket+0x11b/0x1d0
Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST
packets constructed by GRO, the truesize adjustment is removed.
The call to skb_release_head_state() must be preserved. As documented in
commit cf673ed0e057 ("net: fix fraglist segmentation reference count
leak"), it is still required to correctly drop references to SKB
extensions that may be overwritten during __copy_skb_header(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver
at91_adc_interrupt can call at91_adc_touch_data_handler function
to start the work by schedule_work(&st->touch_st.workq).
If we remove the module which will call at91_adc_remove to
make cleanup, it will free indio_dev through iio_device_unregister but
quite a bit later. While the work mentioned above will be used. The
sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| at91_adc_workq_handler
at91_adc_remove |
iio_device_unregister(indio_dev) |
//free indio_dev a bit later |
| iio_push_to_buffers(indio_dev)
| //use indio_dev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in at91_adc_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection
The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL
event_spec field, indicating support for IIO events. However, event
detection is not supported for all sensors, and if userspace tries to
configure accelerometer wakeup events on a sensor device that does not
support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL
pointer when trying to write to the wakeup register.
Define an additional struct iio_chan_spec array whose members have a NULL
event_spec field, and use this array instead of st_lsm6dsx_acc_channels for
sensors without event detection capability. |
| In the Linux kernel, the following vulnerability has been resolved:
w1: therm: Fix off-by-one buffer overflow in alarms_store
The sysfs buffer passed to alarms_store() is allocated with 'size + 1'
bytes and a NUL terminator is appended. However, the 'size' argument
does not account for this extra byte. The original code then allocated
'size' bytes and used strcpy() to copy 'buf', which always writes one
byte past the allocated buffer since strcpy() copies until the NUL
terminator at index 'size'.
Fix this by parsing the 'buf' parameter directly using simple_strtoll()
without allocating any intermediate memory or string copying. This
removes the overflow while simplifying the code. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: stm32-usphyc: Fix off by one in probe()
The "index" variable is used as an index into the usbphyc->phys[] array
which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys
then it is one element out of bounds. The "index" comes from the
device tree so it's data that we trust and it's unlikely to be wrong,
however it's obviously still worth fixing the bug. Change the > to >=. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix regmap max_register
The max_register field is assigned the size of the register memory
region instead of the offset of the last register.
The result is that reading from the regmap via debugfs can cause
a segmentation fault:
tail /sys/kernel/debug/regmap/xdma.1.auto/registers
Unable to handle kernel paging request at virtual address ffff800082f70000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
[...]
Call trace:
regmap_mmio_read32le+0x10/0x30
_regmap_bus_reg_read+0x74/0xc0
_regmap_read+0x68/0x198
regmap_read+0x54/0x88
regmap_read_debugfs+0x140/0x380
regmap_map_read_file+0x30/0x48
full_proxy_read+0x68/0xc8
vfs_read+0xcc/0x310
ksys_read+0x7c/0x120
__arm64_sys_read+0x24/0x40
invoke_syscall.constprop.0+0x64/0x108
do_el0_svc+0xb0/0xd8
el0_svc+0x38/0x130
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
note: tail[1217] exited with irqs disabled
note: tail[1217] exited with preempt_count 1
Segmentation fault |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock in wait_current_trans() due to ignored transaction type
When wait_current_trans() is called during start_transaction(), it
currently waits for a blocked transaction without considering whether
the given transaction type actually needs to wait for that particular
transaction state. The btrfs_blocked_trans_types[] array already defines
which transaction types should wait for which transaction states, but
this check was missing in wait_current_trans().
This can lead to a deadlock scenario involving two transactions and
pending ordered extents:
1. Transaction A is in TRANS_STATE_COMMIT_DOING state
2. A worker processing an ordered extent calls start_transaction()
with TRANS_JOIN
3. join_transaction() returns -EBUSY because Transaction A is in
TRANS_STATE_COMMIT_DOING
4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes
5. A new Transaction B is created (TRANS_STATE_RUNNING)
6. The ordered extent from step 2 is added to Transaction B's
pending ordered extents
7. Transaction B immediately starts commit by another task and
enters TRANS_STATE_COMMIT_START
8. The worker finally reaches wait_current_trans(), sees Transaction B
in TRANS_STATE_COMMIT_START (a blocked state), and waits
unconditionally
9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START
according to btrfs_blocked_trans_types[]
10. Transaction B is waiting for pending ordered extents to complete
11. Deadlock: Transaction B waits for ordered extent, ordered extent
waits for Transaction B
This can be illustrated by the following call stacks:
CPU0 CPU1
btrfs_finish_ordered_io()
start_transaction(TRANS_JOIN)
join_transaction()
# -EBUSY (Transaction A is
# TRANS_STATE_COMMIT_DOING)
# Transaction A completes
# Transaction B created
# ordered extent added to
# Transaction B's pending list
btrfs_commit_transaction()
# Transaction B enters
# TRANS_STATE_COMMIT_START
# waiting for pending ordered
# extents
wait_current_trans()
# waits for Transaction B
# (should not wait!)
Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered
extents:
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
btrfs_commit_transaction+0xbf7/0xda0 [btrfs]
btrfs_sync_file+0x342/0x4d0 [btrfs]
__x64_sys_fdatasync+0x4b/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Task kworker in wait_current_trans waiting for transaction commit:
Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs]
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
wait_current_trans+0xb0/0x110 [btrfs]
start_transaction+0x346/0x5b0 [btrfs]
btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs]
btrfs_work_helper+0xe8/0x350 [btrfs]
process_one_work+0x1d3/0x3c0
worker_thread+0x4d/0x3e0
kthread+0x12d/0x150
ret_from_fork+0x1f/0x30
Fix this by passing the transaction type to wait_current_trans() and
checking btrfs_blocked_trans_types[cur_trans->state] against the given
type before deciding to wait. This ensures that transaction types which
are allowed to join during certain blocked states will not unnecessarily
wait and cause deadlocks. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qusb2: Fix NULL pointer dereference on early suspend
Enabling runtime PM before attaching the QPHY instance as driver data
can lead to a NULL pointer dereference in runtime PM callbacks that
expect valid driver data. There is a small window where the suspend
callback may run after PM runtime enabling and before runtime forbid.
This causes a sporadic crash during boot:
```
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1
[...]
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT
Workqueue: pm pm_runtime_work
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2]
lr : pm_generic_runtime_suspend+0x2c/0x44
[...]
```
Attach the QPHY instance as driver data before enabling runtime PM to
prevent NULL pointer dereference in runtime PM callbacks.
Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: fix a double free in snd_ac97_controller_register()
If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: at_hdmac: fix device leak on of_dma_xlate()
Make sure to drop the reference taken when looking up the DMA platform
device during of_dma_xlate() when releasing channel resources.
Note that commit 3832b78b3ec2 ("dmaengine: at_hdmac: add missing
put_device() call in at_dma_xlate()") fixed the leak in a couple of
error paths but the reference is still leaking on successful allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: bcm-sba-raid: fix device leak on probe
Make sure to drop the reference taken when looking up the mailbox device
during probe on probe failures and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw: dmamux: fix OF node leak on route allocation failure
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: lpc18xx-dmamux: fix device leak on route allocation
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sh: rz-dmac: fix device leak on probe failure
Make sure to drop the reference taken when looking up the ICU device
during probe also on probe failures (e.g. probe deferral). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: stm32: dmamux: fix device leak on route allocation
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation
Make sure to drop the reference taken when looking up the crossbar
platform device during am335x route allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL dereference on root when tracing inode eviction
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here. |
