| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin: Use last transaction's pmd->root when commit failed
Recently we found a softlock up problem in dm thin pool btree lookup
code due to corrupted metadata:
Kernel panic - not syncing: softlockup: hung tasks
CPU: 7 PID: 2669225 Comm: kworker/u16:3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: dm-thin do_worker [dm_thin_pool]
Call Trace:
<IRQ>
dump_stack+0x9c/0xd3
panic+0x35d/0x6b9
watchdog_timer_fn.cold+0x16/0x25
__run_hrtimer+0xa2/0x2d0
</IRQ>
RIP: 0010:__relink_lru+0x102/0x220 [dm_bufio]
__bufio_new+0x11f/0x4f0 [dm_bufio]
new_read+0xa3/0x1e0 [dm_bufio]
dm_bm_read_lock+0x33/0xd0 [dm_persistent_data]
ro_step+0x63/0x100 [dm_persistent_data]
btree_lookup_raw.constprop.0+0x44/0x220 [dm_persistent_data]
dm_btree_lookup+0x16f/0x210 [dm_persistent_data]
dm_thin_find_block+0x12c/0x210 [dm_thin_pool]
__process_bio_read_only+0xc5/0x400 [dm_thin_pool]
process_thin_deferred_bios+0x1a4/0x4a0 [dm_thin_pool]
process_one_work+0x3c5/0x730
Following process may generate a broken btree mixed with fresh and
stale btree nodes, which could get dm thin trapped in an infinite loop
while looking up data block:
Transaction 1: pmd->root = A, A->B->C // One path in btree
pmd->root = X, X->Y->Z // Copy-up
Transaction 2: X,Z is updated on disk, Y write failed.
// Commit failed, dm thin becomes read-only.
process_bio_read_only
dm_thin_find_block
__find_block
dm_btree_lookup(pmd->root)
The pmd->root points to a broken btree, Y may contain stale node
pointing to any block, for example X, which gets dm thin trapped into
a dead loop while looking up Z.
Fix this by setting pmd->root in __open_metadata(), so that dm thin
will use the last transaction's pmd->root if commit failed.
Fetch a reproducer in [Link].
Linke: https://bugzilla.kernel.org/show_bug.cgi?id=216790 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject invalid reloc tree root keys with stack dump
[BUG]
Syzbot reported a crash that an ASSERT() got triggered inside
prepare_to_merge().
That ASSERT() makes sure the reloc tree is properly pointed back by its
subvolume tree.
[CAUSE]
After more debugging output, it turns out we had an invalid reloc tree:
BTRFS error (device loop1): reloc tree mismatch, root 8 has no reloc root, expect reloc root key (-8, 132, 8) gen 17
Note the above root key is (TREE_RELOC_OBJECTID, ROOT_ITEM,
QUOTA_TREE_OBJECTID), meaning it's a reloc tree for quota tree.
But reloc trees can only exist for subvolumes, as for non-subvolume
trees, we just COW the involved tree block, no need to create a reloc
tree since those tree blocks won't be shared with other trees.
Only subvolumes tree can share tree blocks with other trees (thus they
have BTRFS_ROOT_SHAREABLE flag).
Thus this new debug output proves my previous assumption that corrupted
on-disk data can trigger that ASSERT().
[FIX]
Besides the dedicated fix and the graceful exit, also let tree-checker to
check such root keys, to make sure reloc trees can only exist for subvolumes. |
| Improper access control in SamsungContacts prior to SMR Apr-2025 Release 1 allows local attackers to access protected data in SamsungContacts. |
| When BIG-IP Next Central Manager is running, undisclosed requests to the BIG-IP Next Central Manager API can cause the BIG-IP Next Central Manager Node's Kubernetes service to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: do not clobber swp_entry_t during THP split
The following has been observed when running stressng mmap since commit
b653db77350c ("mm: Clear page->private when splitting or migrating a page")
watchdog: BUG: soft lockup - CPU#75 stuck for 26s! [stress-ng:9546]
CPU: 75 PID: 9546 Comm: stress-ng Tainted: G E 6.0.0-revert-b653db77-fix+ #29 0357d79b60fb09775f678e4f3f64ef0579ad1374
Hardware name: SGI.COM C2112-4GP3/X10DRT-P-Series, BIOS 2.0a 05/09/2016
RIP: 0010:xas_descend+0x28/0x80
Code: cc cc 0f b6 0e 48 8b 57 08 48 d3 ea 83 e2 3f 89 d0 48 83 c0 04 48 8b 44 c6 08 48 89 77 18 48 89 c1 83 e1 03 48 83 f9 02 75 08 <48> 3d fd 00 00 00 76 08 88 57 12 c3 cc cc cc cc 48 c1 e8 02 89 c2
RSP: 0018:ffffbbf02a2236a8 EFLAGS: 00000246
RAX: ffff9cab7d6a0002 RBX: ffffe04b0af88040 RCX: 0000000000000002
RDX: 0000000000000030 RSI: ffff9cab60509b60 RDI: ffffbbf02a2236c0
RBP: 0000000000000000 R08: ffff9cab60509b60 R09: ffffbbf02a2236c0
R10: 0000000000000001 R11: ffffbbf02a223698 R12: 0000000000000000
R13: ffff9cab4e28da80 R14: 0000000000039c01 R15: ffff9cab4e28da88
FS: 00007fab89b85e40(0000) GS:ffff9cea3fcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fab84e00000 CR3: 00000040b73a4003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
xas_load+0x3a/0x50
__filemap_get_folio+0x80/0x370
? put_swap_page+0x163/0x360
pagecache_get_page+0x13/0x90
__try_to_reclaim_swap+0x50/0x190
scan_swap_map_slots+0x31e/0x670
get_swap_pages+0x226/0x3c0
folio_alloc_swap+0x1cc/0x240
add_to_swap+0x14/0x70
shrink_page_list+0x968/0xbc0
reclaim_page_list+0x70/0xf0
reclaim_pages+0xdd/0x120
madvise_cold_or_pageout_pte_range+0x814/0xf30
walk_pgd_range+0x637/0xa30
__walk_page_range+0x142/0x170
walk_page_range+0x146/0x170
madvise_pageout+0xb7/0x280
? asm_common_interrupt+0x22/0x40
madvise_vma_behavior+0x3b7/0xac0
? find_vma+0x4a/0x70
? find_vma+0x64/0x70
? madvise_vma_anon_name+0x40/0x40
madvise_walk_vmas+0xa6/0x130
do_madvise+0x2f4/0x360
__x64_sys_madvise+0x26/0x30
do_syscall_64+0x5b/0x80
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
? do_syscall_64+0x67/0x80
? common_interrupt+0x8b/0xa0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The problem can be reproduced with the mmtests config
config-workload-stressng-mmap. It does not always happen and when it
triggers is variable but it has happened on multiple machines.
The intent of commit b653db77350c patch was to avoid the case where
PG_private is clear but folio->private is not-NULL. However, THP tail
pages uses page->private for "swp_entry_t if folio_test_swapcache()" as
stated in the documentation for struct folio. This patch only clobbers
page->private for tail pages if the head page was not in swapcache and
warns once if page->private had an unexpected value. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
If creation or finalization of a checkpoint fails due to anomalies in the
checkpoint metadata on disk, a kernel warning is generated.
This patch replaces the WARN_ONs by nilfs_error, so that a kernel, booted
with panic_on_warn, does not panic. A nilfs_error is appropriate here to
handle the abnormal filesystem condition.
This also replaces the detected error codes with an I/O error so that
neither of the internal error codes is returned to callers. |
| In the Linux kernel, the following vulnerability has been resolved:
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
If mcb_device_register() returns error in chameleon_parse_gdd(), the refcount
of bus and device name are leaked. Fix this by calling put_device() to give up
the reference, so they can be released in mcb_release_dev() and kobject_cleanup(). |
| An Improper Access Control vulnerability [CWE-284] vulnerability in Fortinet FortiDeceptor 6.0.0, FortiDeceptor 5.3 all versions, FortiDeceptor 5.2 all versions, FortiDeceptor 5.1 all versions, FortiDeceptor 5.0 all versions may allow an authenticated attacker with none privileges to perform operations on the central management appliance via crafted requests. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: reduce WARN to dev_dbg() in callback
The warn is triggered on a known race condition, documented in the code above
the test, that is correctly handled. Using WARN() hinders automated testing.
Reducing severity. |
| In the Linux kernel, the following vulnerability has been resolved:
x86: fix clear_user_rep_good() exception handling annotation
This code no longer exists in mainline, because it was removed in
commit d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory
clearing") upstream.
However, rather than backport the full range of x86 memory clearing and
copying cleanups, fix the exception table annotation placement for the
final 'rep movsb' in clear_user_rep_good(): rather than pointing at the
actual instruction that did the user space access, it pointed to the
register move just before it.
That made sense from a code flow standpoint, but not from an actual
usage standpoint: it means that if user access takes an exception, the
exception handler won't actually find the instruction in the exception
tables.
As a result, rather than fixing it up and returning -EFAULT, it would
then turn it into a kernel oops report instead, something like:
BUG: unable to handle page fault for address: 0000000020081000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
...
RIP: 0010:clear_user_rep_good+0x1c/0x30 arch/x86/lib/clear_page_64.S:147
...
Call Trace:
__clear_user arch/x86/include/asm/uaccess_64.h:103 [inline]
clear_user arch/x86/include/asm/uaccess_64.h:124 [inline]
iov_iter_zero+0x709/0x1290 lib/iov_iter.c:800
iomap_dio_hole_iter fs/iomap/direct-io.c:389 [inline]
iomap_dio_iter fs/iomap/direct-io.c:440 [inline]
__iomap_dio_rw+0xe3d/0x1cd0 fs/iomap/direct-io.c:601
iomap_dio_rw+0x40/0xa0 fs/iomap/direct-io.c:689
ext4_dio_read_iter fs/ext4/file.c:94 [inline]
ext4_file_read_iter+0x4be/0x690 fs/ext4/file.c:145
call_read_iter include/linux/fs.h:2183 [inline]
do_iter_readv_writev+0x2e0/0x3b0 fs/read_write.c:733
do_iter_read+0x2f2/0x750 fs/read_write.c:796
vfs_readv+0xe5/0x150 fs/read_write.c:916
do_preadv+0x1b6/0x270 fs/read_write.c:1008
__do_sys_preadv2 fs/read_write.c:1070 [inline]
__se_sys_preadv2 fs/read_write.c:1061 [inline]
__x64_sys_preadv2+0xef/0x150 fs/read_write.c:1061
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
which then looks like a filesystem bug rather than the incorrect
exception annotation that it is.
[ The alternative to this one-liner fix is to take the upstream series
that cleans this all up:
68674f94ffc9 ("x86: don't use REP_GOOD or ERMS for small memory copies")
20f3337d350c ("x86: don't use REP_GOOD or ERMS for small memory clearing")
adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory copies")
* d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing")
3639a535587d ("x86: move stac/clac from user copy routines into callers")
577e6a7fd50d ("x86: inline the 'rep movs' in user copies for the FSRM case")
8c9b6a88b7e2 ("x86: improve on the non-rep 'clear_user' function")
427fda2c8a49 ("x86: improve on the non-rep 'copy_user' function")
* e046fe5a36a9 ("x86: set FSRS automatically on AMD CPUs that have FSRM")
e1f2750edc4a ("x86: remove 'zerorest' argument from __copy_user_nocache()")
034ff37d3407 ("x86: rewrite '__copy_user_nocache' function")
with either the whole series or at a minimum the two marked commits
being needed to fix this issue ] |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-shark: Add endpoint checks
The syzbot fuzzer was able to provoke a WARNING from the radio-shark2
driver:
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 3271 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 3271 Comm: kworker/0:3 Not tainted 6.1.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 00 36 ea fb 48 8b 7c 24 18 e8 36 1c 02 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 b6 90 8a e8 9a 29 b8 03 <0f> 0b e9 58 f8 ff ff e8 d2 35 ea fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90003876dd0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff8880750b0040 RSI: ffffffff816152b8 RDI: fffff5200070edac
RBP: ffff8880172d81e0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffff8880285c5040 R14: 0000000000000002 R15: ffff888017158200
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe03235b90 CR3: 000000000bc8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_bulk_msg+0x226/0x550 drivers/usb/core/message.c:387
shark_write_reg+0x1ff/0x2e0 drivers/media/radio/radio-shark2.c:88
...
The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types. This can be fixed by adding a simple check of
these endpoints (and similarly for the radio-shark driver). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs
The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.
[ 102.873958] Call Trace:
[ 102.873959] <TASK>
[ 102.873961] gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu]
[ 102.874019] gfx_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.874072] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.874122] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.874172] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.874223] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.874321] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.874375] process_one_work+0x21f/0x3f0
[ 102.874377] worker_thread+0x200/0x3e0
[ 102.874378] ? process_one_work+0x3f0/0x3f0
[ 102.874379] kthread+0xfd/0x130
[ 102.874380] ? kthread_complete_and_exit+0x20/0x20
[ 102.874381] ret_from_fork+0x22/0x30
v2:
- Handle umc and gfx ras cases in separated patch
- Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11
v3:
- Improve the subject and code comments
- Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init
v4:
- Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and
SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state
- Check cp_ecc_error_irq.funcs rather than ip version for a more
sustainable life
v5:
- Simplify judgment conditions |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix unpinning of pages when an access is present
syzkaller found that the calculation of batch_last_index should use
'start_index' since at input to this function the batch is either empty or
it has already been adjusted to cross any accesses so it will start at the
point we are unmapping from.
Getting this wrong causes the unmap to run over the end of the pages
which corrupts pages that were never mapped. In most cases this triggers
the num pinned debugging:
WARNING: CPU: 0 PID: 557 at drivers/iommu/iommufd/pages.c:294 __iopt_area_unfill_domain+0x152/0x560
Modules linked in:
CPU: 0 PID: 557 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__iopt_area_unfill_domain+0x152/0x560
Code: d2 0f ff 44 8b 64 24 54 48 8b 44 24 48 31 ff 44 89 e6 48 89 44 24 38 e8 fc d3 0f ff 45 85 e4 0f 85 eb 01 00 00 e8 0e d2 0f ff <0f> 0b e8 07 d2 0f ff 48 8b 44 24 38 89 5c 24 58 89 18 8b 44 24 54
RSP: 0018:ffffc9000108baf0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000ffffffff RCX: ffffffff821e3f85
RDX: 0000000000000000 RSI: ffff88800faf0000 RDI: 0000000000000002
RBP: ffffc9000108bd18 R08: 000000000003ca25 R09: 0000000000000014
R10: 000000000003ca00 R11: 0000000000000024 R12: 0000000000000004
R13: 0000000000000801 R14: 00000000000007ff R15: 0000000000000800
FS: 00007f3499ce1740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000243 CR3: 00000000179c2001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
iopt_area_unfill_domain+0x32/0x40
iopt_table_remove_domain+0x23f/0x4c0
iommufd_device_selftest_detach+0x3a/0x90
iommufd_selftest_destroy+0x55/0x70
iommufd_object_destroy_user+0xce/0x130
iommufd_destroy+0xa2/0xc0
iommufd_fops_ioctl+0x206/0x330
__x64_sys_ioctl+0x10e/0x160
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Also add some useful WARN_ON sanity checks. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()
Hold RTNL lock when calling xdp_set_features() with a registered netdev,
as the call triggers the netdev notifiers. This could happen when
switching from uplink rep to nic profile for example.
This resolves the following call trace:
RTNL: assertion failed at net/core/dev.c (1953)
WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80
Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80
Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec
RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027
RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0
RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003
R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968
R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0
FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x79/0x120
? call_netdevice_notifiers_info+0x7c/0x80
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? call_netdevice_notifiers_info+0x7c/0x80
? call_netdevice_notifiers_info+0x7c/0x80
call_netdevice_notifiers+0x2e/0x50
mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core]
mlx5e_nic_init+0xf1/0x1a0 [mlx5_core]
mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core]
mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core]
mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core]
__esw_offloads_unload_rep+0x52/0x60 [mlx5_core]
mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core]
esw_offloads_unload_rep+0x34/0x70 [mlx5_core]
esw_offloads_disable+0x2b/0x90 [mlx5_core]
mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core]
? devlink_get_from_attrs_lock+0x9e/0x110
devlink_nl_cmd_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x17d/0x2b0
? devlink_get_from_attrs_lock+0x110/0x110
? devlink_nl_cmd_eswitch_get_doit+0x290/0x290
? devlink_pernet_pre_exit+0xf0/0xf0
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x232/0x4a0
sock_sendmsg+0x38/0x60
? _copy_from_user+0x2a/0x60
__sys_sendto+0x110/0x160
? __count_memcg_events+0x48/0x90
? handle_mm_fault+0x161/0x260
? do_user_addr_fault+0x278/0x6e0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Fixed a BTI error on returning to patched function
When BPF_TRAMP_F_CALL_ORIG is set, BPF trampoline uses BLR to jump
back to the instruction next to call site to call the patched function.
For BTI-enabled kernel, the instruction next to call site is usually
PACIASP, in this case, it's safe to jump back with BLR. But when
the call site is not followed by a PACIASP or bti, a BTI exception
is triggered.
Here is a fault log:
Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI
CPU: 0 PID: 263 Comm: test_progs Tainted: GF
Hardware name: linux,dummy-virt (DT)
pstate: 40400805 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c)
pc : bpf_fentry_test1+0xc/0x30
lr : bpf_trampoline_6442573892_0+0x48/0x1000
sp : ffff80000c0c3a50
x29: ffff80000c0c3a90 x28: ffff0000c2e6c080 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000050
x23: 0000000000000000 x22: 0000ffffcfd2a7f0 x21: 000000000000000a
x20: 0000ffffcfd2a7f0 x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcfd2a7f0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: ffff80000914f5e4 x9 : ffff8000082a1528
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0101010101010101
x5 : 0000000000000000 x4 : 00000000fffffff2 x3 : 0000000000000001
x2 : ffff8001f4b82000 x1 : 0000000000000000 x0 : 0000000000000001
Kernel panic - not syncing: Unhandled exception
CPU: 0 PID: 263 Comm: test_progs Tainted: GF
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0xec/0x144
show_stack+0x24/0x7c
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
panic+0x1cc/0x3ec
__el0_error_handler_common+0x0/0x130
el1h_64_sync_handler+0x60/0xd0
el1h_64_sync+0x78/0x7c
bpf_fentry_test1+0xc/0x30
bpf_fentry_test1+0xc/0x30
bpf_prog_test_run_tracing+0xdc/0x2a0
__sys_bpf+0x438/0x22a0
__arm64_sys_bpf+0x30/0x54
invoke_syscall+0x78/0x110
el0_svc_common.constprop.0+0x6c/0x1d0
do_el0_svc+0x38/0xe0
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x1ac/0x1b0
el0t_64_sync+0x1a0/0x1a4
Kernel Offset: disabled
CPU features: 0x0000,00034c24,f994fdab
Memory Limit: none
And the instruction next to call site of bpf_fentry_test1 is ADD,
not PACIASP:
<bpf_fentry_test1>:
bti c
nop
nop
add w0, w0, #0x1
paciasp
For BPF prog, JIT always puts a PACIASP after call site for BTI-enabled
kernel, so there is no problem. To fix it, replace BLR with RET to bypass
the branch target check. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: fix wrong ct->timeout value
(struct nf_conn)->timeout is an interval before the conntrack
confirmed. After confirmed, it becomes a timestamp.
It is observed that timeout of an unconfirmed conntrack:
- Set by calling ctnetlink_change_timeout(). As a result,
`nfct_time_stamp` was wrongly added to `ct->timeout` twice.
- Get by calling ctnetlink_dump_timeout(). As a result,
`nfct_time_stamp` was wrongly subtracted.
Call Trace:
<TASK>
dump_stack_lvl
ctnetlink_dump_timeout
__ctnetlink_glue_build
ctnetlink_glue_build
__nfqnl_enqueue_packet
nf_queue
nf_hook_slow
ip_mc_output
? __pfx_ip_finish_output
ip_send_skb
? __pfx_dst_output
udp_send_skb
udp_sendmsg
? __pfx_ip_generic_getfrag
sock_sendmsg
Separate the 2 cases in:
- Setting `ct->timeout` in __nf_ct_set_timeout().
- Getting `ct->timeout` in ctnetlink_dump_timeout().
Pablo appends:
Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is
set on, otherwise conntrack creation via ctnetlink breaks.
Note that the problem described in this patch occurs since the
introduction of the nfnetlink_queue conntrack support, select a
sufficiently old Fixes: tag for -stable kernel to pick up this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: exc3000 - properly stop timer on shutdown
We need to stop the timer on driver unbind or probe failures, otherwise
we get UAF/Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Add validation before accessing cgx and lmac
with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.
This patch fixes the issue by adding proper checks.
[ 23.219150] pc : cgx_lmac_read+0x38/0x70
[ 23.219154] lr : rvu_program_channels+0x3f0/0x498
[ 23.223852] sp : ffff000100d6fc80
[ 23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[ 23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000 |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: Don't migrate perf to the CPU going to teardown
The driver needs to migrate the perf context if the current using CPU going
to teardown. By the time calling the cpuhp::teardown() callback the
cpu_online_mask() hasn't updated yet and still includes the CPU going to
teardown. In current driver's implementation we may migrate the context
to the teardown CPU and leads to the below calltrace:
...
[ 368.104662][ T932] task:cpuhp/0 state:D stack: 0 pid: 15 ppid: 2 flags:0x00000008
[ 368.113699][ T932] Call trace:
[ 368.116834][ T932] __switch_to+0x7c/0xbc
[ 368.120924][ T932] __schedule+0x338/0x6f0
[ 368.125098][ T932] schedule+0x50/0xe0
[ 368.128926][ T932] schedule_preempt_disabled+0x18/0x24
[ 368.134229][ T932] __mutex_lock.constprop.0+0x1d4/0x5dc
[ 368.139617][ T932] __mutex_lock_slowpath+0x1c/0x30
[ 368.144573][ T932] mutex_lock+0x50/0x60
[ 368.148579][ T932] perf_pmu_migrate_context+0x84/0x2b0
[ 368.153884][ T932] hisi_pcie_pmu_offline_cpu+0x90/0xe0 [hisi_pcie_pmu]
[ 368.160579][ T932] cpuhp_invoke_callback+0x2a0/0x650
[ 368.165707][ T932] cpuhp_thread_fun+0xe4/0x190
[ 368.170316][ T932] smpboot_thread_fn+0x15c/0x1a0
[ 368.175099][ T932] kthread+0x108/0x13c
[ 368.179012][ T932] ret_from_fork+0x10/0x18
...
Use function cpumask_any_but() to find one correct active cpu to fixes
this issue. |
| During the TLS 1.3 handshake if multiple messages are sent in records that span encryption level boundaries (for instance the Client Hello and Encrypted Extensions messages), the subsequent messages may be processed before the encryption level changes. This can cause some minor information disclosure if a network-local attacker can inject messages during the handshake. |
