| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: switchdev: Fix memory leaks when changing VLAN protocol
The bridge driver can offload VLANs to the underlying hardware either
via switchdev or the 8021q driver. When the former is used, the VLAN is
marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV'
private flag.
To avoid the memory leaks mentioned in the cited commit, the bridge
driver will try to delete a VLAN via the 8021q driver if the VLAN is not
marked with the previously mentioned flag.
When the VLAN protocol of the bridge changes, switchdev drivers are
notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but
the 8021q driver is also called to add the existing VLANs with the new
protocol and delete them with the old protocol.
In case the VLANs were offloaded via switchdev, the above behavior is
both redundant and buggy. Redundant because the VLANs are already
programmed in hardware and drivers that support VLAN protocol change
(currently only mlx5) change the protocol upon the switchdev attribute
notification. Buggy because the 8021q driver is called despite these
VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to
memory leaks [1] when the VLANs are deleted.
Fix by not calling the 8021q driver for VLANs that were already
programmed via switchdev.
[1]
unreferenced object 0xffff8881f6771200 (size 256):
comm "ip", pid 446855, jiffies 4298238841 (age 55.240s)
hex dump (first 32 bytes):
00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000012819ac>] vlan_vid_add+0x437/0x750
[<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920
[<000000000632b56f>] br_changelink+0x3d6/0x13f0
[<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0
[<00000000f6276baf>] rtnl_newlink+0x5f/0x90
[<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00
[<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340
[<0000000010588814>] netlink_unicast+0x438/0x710
[<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40
[<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0
[<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0
[<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0
[<00000000684f7e25>] __sys_sendmsg+0xab/0x130
[<000000004538b104>] do_syscall_64+0x3d/0x90
[<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| A vulnerability was found in Undertow. This issue requires enabling the learning-push handler in the server's config, which is disabled by default, leaving the maxAge config in the handler unconfigured. The default is -1, which makes the handler vulnerable. If someone overwrites that config, the server is not subject to the attack. The attacker needs to be able to reach the server with a normal HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mhi: Fix memory leak in mhi_net_dellink()
MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch calls free_netdev() to fix it since netdev_priv
is used after unregister. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: i8042 - fix leaking of platform device on module removal
Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/uncore: Fix memory leak for events array
When a CPU comes online, the per-CPU NB and LLC uncore contexts are
freed but not the events array within the context structure. This
causes a memory leak as identified by the kmemleak detector.
[...]
unreferenced object 0xffff8c5944b8e320 (size 32):
comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000000759fb79>] amd_uncore_cpu_up_prepare+0xaf/0x230
[<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470
[<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170
[<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330
[<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110
[<0000000015365e0f>] amd_uncore_init+0x260/0x321
[<00000000089152d2>] do_one_initcall+0x3f/0x1f0
[<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212
[<0000000030be8dde>] kernel_init+0x11/0x120
[<0000000059709e59>] ret_from_fork+0x22/0x30
unreferenced object 0xffff8c5944b8dd40 (size 64):
comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000306efe8b>] amd_uncore_cpu_up_prepare+0x183/0x230
[<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470
[<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170
[<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330
[<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110
[<0000000015365e0f>] amd_uncore_init+0x260/0x321
[<00000000089152d2>] do_one_initcall+0x3f/0x1f0
[<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212
[<0000000030be8dde>] kernel_init+0x11/0x120
[<0000000059709e59>] ret_from_fork+0x22/0x30
[...]
Fix the problem by freeing the events array before freeing the uncore
context. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated
by dev_set_name() need be freed. As comment of device_register() says, it
should use put_device() to give up the reference in the error path. So fix
this by calling put_device(), then the name can be freed in kobject_cleanup().
The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need
goto error label in this case. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.4. An app may be able to cause unexpected system termination. |
| Bitcoin Core through 29.0 allows Uncontrolled Resource Consumption (issue 1 of 2). |
| Bitcoin Core through 29.0 allows Uncontrolled Resource Consumption (issue 2 of 2). |
| A flaw was found in the blkgs destruction path in block/blk-cgroup.c in the Linux kernel, leading to a cgroup blkio memory leakage problem. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn(), which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg and some blkgs from being freed after they are made offline. This issue may allow an attacker with a local access to cause system instability, such as an out of memory error. |
| An issue was discovered in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 2100, 1280, 2200, 1330, 1380, 1480, 9110, Modem 5123. Mishandling of an 5G NRMM packet leads to a Denial of Service. |
| fs2 is a compositional, streaming I/O library for Scala. Versions up to and including 2.5.12, 3.0.0-M1 through 3.12.2, and 3.13.0-M1 through 3.13.0-M6 are vulnerable to denial of service attacks though TLS sessions using fs2-io on the JVM using the fs2.io.net.tls package. When establishing a TLS session, if one side of the connection shuts down `write` while the peer side is awaiting more data to progress the TLS handshake, the peer side will spin loop on the socket read, fully utilizing a CPU. The CPU is consumed until the overall connection is closed, potentially shutting down a fs2-io powered server. This issue is fixed in versions 2.5.13, 3.12.1, and 3.13.0-M7. |
| A vulnerability in the Eclipse Vert.x toolkit results in a memory leak due to using Netty FastThreadLocal data structures. Specifically, when the Vert.x HTTP client establishes connections to different hosts, triggering the memory leak. The leak can be accelerated with intimate runtime knowledge, allowing an attacker to exploit this vulnerability. For instance, a server accepting arbitrary internet addresses could serve as an attack vector by connecting to these addresses, thereby accelerating the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: smsc95xx: Limit packet length to skb->len
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents. |
| Zohocorp ManageEngine Exchange Reporter Plus through 5721 are vulnerable to ReDOS vulnerability in the search module. |
| A vulnerability was found in libX11 due to an infinite loop within the PutSubImage() function. This flaw allows a local user to consume all available system resources and cause a denial of service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
rethook: fix a potential memleak in rethook_alloc()
In rethook_alloc(), the variable rh is not freed or passed out
if handler is NULL, which could lead to a memleak, fix it.
[Masami: Add "rethook:" tag to the title.]
Acke-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
If iio_trigger_register() returns error, it should call iio_trigger_free()
to give up the reference that hold in iio_trigger_alloc(), so that it can
call iio_trig_release() to free memory when the refcount hit to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()
dev_set_name() allocates memory for name, it need be freed
when device_add() fails, call put_device() to give up the
reference that hold in device_initialize(), so that it can
be freed in kobject_cleanup() when the refcount hit to 0.
Fault injection test can trigger this:
unreferenced object 0xffff8e8340a7b4c0 (size 32):
comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s)
hex dump (first 32 bytes):
69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge
72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............
backtrace:
[<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360
[<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0
[<000000003636c520>] kstrdup+0x2d/0x60
[<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90
[<0000000092efe493>] dev_set_name+0x4e/0x70 |
