| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Lexbor is a web browser engine library. Prior to 2.7.0, the ISO‑2022‑JP encoder in Lexbor fails to reset the temporary size variable between iterations. The statement ctx->buffer_used -= size with a stale size = 3 causes an integer underflow that wraps to SIZE_MAX. Afterwards, memcpy is called with a negative length, leading to an out‑of‑bounds read from the stack and an out‑of‑bounds write to the heap. The source data is partially controllable via the contents of the DOM tree. This vulnerability is fixed in 2.7.0. |
| A container privilege escalation flaw was found in certain Multi-Cloud Object Gateway Core images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container |
| Lexbor is a web browser engine library. Prior to 2.7.0, a type‑confusion vulnerability exists in Lexbor’s HTML fragment parser. When ns = UNDEF, a comment is created using the “unknown element” constructor. The comment’s data are written into the element’s fields via an unsafe cast, corrupting the qualified_name field. That corrupted value is later used as a pointer and dereferenced near the zero page. This vulnerability is fixed in 2.7.0. |
| A vulnerability was detected in Portabilis i-Educar 2.11. This impacts an unknown function of the file /intranet/educar_servidor_curso_lst.php of the component Endpoint. Performing a manipulation of the argument Name results in cross site scripting. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in TRENDnet TEW-824DRU 1.010B01/1.04B01. The impacted element is the function sub_420A78 of the file apply_sec.cgi of the component Web Interface. Such manipulation of the argument Language leads to cross site scripting. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| SFTPGo is an open source, event-driven file transfer solution. In SFTPGo versions prior to 2.7.1, a path normalization discrepancy between the protocol handlers and the internal Virtual Filesystem routing can lead to an authorization bypass. An authenticated attacker can craft specific file paths to bypass folder-level permissions or escape the boundaries of a configured Virtual Folder. This vulnerability is fixed in 2.7.1. |
| pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 0.14.0 and prior to version 26.0.0, if a user provided callback to `set_tlsext_servername_callback` raised an unhandled exception, this would result in a connection being accepted. If a user was relying on this callback for any security-sensitive behavior, this could allow bypassing it. Starting in version 26.0.0, unhandled exceptions now result in rejecting the connection. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.3, the `pyasn1` library is vulnerable to a Denial of Service (DoS) attack caused by uncontrolled recursion when decoding ASN.1 data with deeply nested structures. An attacker can supply a crafted payload containing thousands of nested `SEQUENCE` (`0x30`) or `SET` (`0x31`) tags with "Indefinite Length" (`0x80`) markers. This forces the decoder to recursively call itself until the Python interpreter crashes with a `RecursionError` or consumes all available memory (OOM), crashing the host application. This is a distinct vulnerability from CVE-2026-23490 (which addressed integer overflows in OID decoding). The fix for CVE-2026-23490 (`MAX_OID_ARC_CONTINUATION_OCTETS`) does not mitigate this recursion issue. Version 0.6.3 fixes this specific issue. |
| Sentry is a developer-first error tracking and performance monitoring tool. Versions prior to 26.1.0 have a cross-organization Insecure Direct Object Reference (IDOR) vulnerability in Sentry's GroupEventJsonView endpoint. Version 26.1.0 patches the issue. |
| The GLPI Inventory Plugin handles network discovery, inventory, software deployment, and data collection for GLPI agents. Prior to 1.6.6, non sanitized user input can lend to an SQL injection from reports, with adequate rights. This vulnerability is fixed in 1.6.6. |
| SFTPGo is an open source, event-driven file transfer solution. SFTPGo versions before v2.7.1 contain an input validation issue in the handling of dynamic group paths, for example, home directories or key prefixes. When a group is configured with a dynamic home directory or key prefix using placeholders like %username%, the value replacing the placeholder is not strictly sanitized against relative path components. Consequently, if a user is created with a specially crafted username the resulting path may resolve to a parent directory instead of the intended sub-directory. This issue is fixed in version v2.7.1 |
| Unprotected internal endpoints in Cloud Foundry Capi Release 1.226.0 and below, and CF Deployment v54.9.0 and below on all platforms allows any user who has bypassed the firewall to potentially replace droplets and therefore applications allowing them to access secure application information. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_LEN` method, the `cram_byte_array_len_decode()` failed to validate that the amount of data being unpacked matched the size of the output buffer where it was to be stored. Depending on the data series being read, this could result either in a heap or a stack overflow with attacker-controlled bytes. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_STOP` method, an out-by-one error in the `cram_byte_array_stop_decode_char()` function check for a full output buffer could result in a single attacker-controlled byte being written beyond the end of a heap allocation. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. For the `VARINT` and `CONST` encodings, incomplete validation of the context in which the encodings were used could result in up to eight bytes being written beyond the end of a heap allocation, or up to eight bytes being written to the location of a one byte variable on the stack, possibly causing the values to adjacent variables to change unexpectedly. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. In the `cram_decode_slice()` function called while reading CRAM records, the value of the mate reference id field was not validated. Later use of this value, for example when converting the data to SAM format, could result in the out of bounds array reads when looking up the corresponding reference name. If the array value obtained also happened to be a valid pointer, it would be interpreted as a string and an attempt would be made to write the data as part of the SAM record. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. As one method of removing redundant data, CRAM uses reference-based compression so that instead of storing the full sequence for each alignment record it stores a location in an external reference sequence along with a list of differences to the reference at that location as a sequence of "features". When decoding CRAM records, the reference data is stored in a char array, and parts matching the alignment record sequence are copied over as necessary. Due to insufficient validation of the feature data series, it was possible to make the `cram_decode_seq()` function copy data from either before the start, or after the end of the stored reference either into the buffer used to store the output sequence for the cram record, or into the buffer used to build the SAM `MD` tag. This allowed arbitrary data to be leaked to the calling function. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| After the publication of the PoC by the researcher and further analysis, we have determined that this issue does not constitute a valid vulnerability. The technique described is an obfuscation method and does not bypass or impact any implicit or explicit security controls. |
| IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.1.0.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_1, 6.2.1.0 through 6.2.1.1_1, and 6.2.2.0 allows a remote unauthenticated attacker to view and delete the partners of a community and to delete the communities. |
| Deserialization of Untrusted Data vulnerability in Shinetheme Traveler allows Object Injection.This issue affects Traveler: from n/a before 3.2.8.1. |
