| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the "NSEC3" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix a fence leak in submit error path
In error paths, we could unref the submit without calling
drm_sched_entity_push_job(), so msm_job_free() will never get
called. Since drm_sched_job_cleanup() will NULL out the
s_fence, we can use that to detect this case.
Patchwork: https://patchwork.freedesktop.org/patch/653584/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix another leak in the submit error path
put_unused_fd() doesn't free the installed file, if we've already done
fd_install(). So we need to also free the sync_file.
Patchwork: https://patchwork.freedesktop.org/patch/653583/ |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: fix VM_PAT handling in COW mappings
PAT handling won't do the right thing in COW mappings: the first PTE (or,
in fact, all PTEs) can be replaced during write faults to point at anon
folios. Reliably recovering the correct PFN and cachemode using
follow_phys() from PTEs will not work in COW mappings.
Using follow_phys(), we might just get the address+protection of the anon
folio (which is very wrong), or fail on swap/nonswap entries, failing
follow_phys() and triggering a WARN_ON_ONCE() in untrack_pfn() and
track_pfn_copy(), not properly calling free_pfn_range().
In free_pfn_range(), we either wouldn't call memtype_free() or would call
it with the wrong range, possibly leaking memory.
To fix that, let's update follow_phys() to refuse returning anon folios,
and fallback to using the stored PFN inside vma->vm_pgoff for COW mappings
if we run into that.
We will now properly handle untrack_pfn() with COW mappings, where we
don't need the cachemode. We'll have to fail fork()->track_pfn_copy() if
the first page was replaced by an anon folio, though: we'd have to store
the cachemode in the VMA to make this work, likely growing the VMA size.
For now, lets keep it simple and let track_pfn_copy() just fail in that
case: it would have failed in the past with swap/nonswap entries already,
and it would have done the wrong thing with anon folios.
Simple reproducer to trigger the WARN_ON_ONCE() in untrack_pfn():
<--- C reproducer --->
#include <stdio.h>
#include <sys/mman.h>
#include <unistd.h>
#include <liburing.h>
int main(void)
{
struct io_uring_params p = {};
int ring_fd;
size_t size;
char *map;
ring_fd = io_uring_setup(1, &p);
if (ring_fd < 0) {
perror("io_uring_setup");
return 1;
}
size = p.sq_off.array + p.sq_entries * sizeof(unsigned);
/* Map the submission queue ring MAP_PRIVATE */
map = mmap(0, size, PROT_READ | PROT_WRITE, MAP_PRIVATE,
ring_fd, IORING_OFF_SQ_RING);
if (map == MAP_FAILED) {
perror("mmap");
return 1;
}
/* We have at least one page. Let's COW it. */
*map = 0;
pause();
return 0;
}
<--- C reproducer --->
On a system with 16 GiB RAM and swap configured:
# ./iouring &
# memhog 16G
# killall iouring
[ 301.552930] ------------[ cut here ]------------
[ 301.553285] WARNING: CPU: 7 PID: 1402 at arch/x86/mm/pat/memtype.c:1060 untrack_pfn+0xf4/0x100
[ 301.553989] Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_g
[ 301.558232] CPU: 7 PID: 1402 Comm: iouring Not tainted 6.7.5-100.fc38.x86_64 #1
[ 301.558772] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebu4
[ 301.559569] RIP: 0010:untrack_pfn+0xf4/0x100
[ 301.559893] Code: 75 c4 eb cf 48 8b 43 10 8b a8 e8 00 00 00 3b 6b 28 74 b8 48 8b 7b 30 e8 ea 1a f7 000
[ 301.561189] RSP: 0018:ffffba2c0377fab8 EFLAGS: 00010282
[ 301.561590] RAX: 00000000ffffffea RBX: ffff9208c8ce9cc0 RCX: 000000010455e047
[ 301.562105] RDX: 07fffffff0eb1e0a RSI: 0000000000000000 RDI: ffff9208c391d200
[ 301.562628] RBP: 0000000000000000 R08: ffffba2c0377fab8 R09: 0000000000000000
[ 301.563145] R10: ffff9208d2292d50 R11: 0000000000000002 R12: 00007fea890e0000
[ 301.563669] R13: 0000000000000000 R14: ffffba2c0377fc08 R15: 0000000000000000
[ 301.564186] FS: 0000000000000000(0000) GS:ffff920c2fbc0000(0000) knlGS:0000000000000000
[ 301.564773] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 301.565197] CR2: 00007fea88ee8a20 CR3: 00000001033a8000 CR4: 0000000000750ef0
[ 301.565725] PKRU: 55555554
[ 301.565944] Call Trace:
[ 301.566148] <TASK>
[ 301.566325] ? untrack_pfn+0xf4/0x100
[ 301.566618] ? __warn+0x81/0x130
[ 301.566876] ? untrack_pfn+0xf4/0x100
[ 3
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
In the following sequence:
1) of_platform_depopulate()
2) of_overlay_remove()
During the step 1, devices are destroyed and devlinks are removed.
During the step 2, OF nodes are destroyed but
__of_changeset_entry_destroy() can raise warnings related to missing
of_node_put():
ERROR: memory leak, expected refcount 1 instead of 2 ...
Indeed, during the devlink removals performed at step 1, the removal
itself releasing the device (and the attached of_node) is done by a job
queued in a workqueue and so, it is done asynchronously with respect to
function calls.
When the warning is present, of_node_put() will be called but wrongly
too late from the workqueue job.
In order to be sure that any ongoing devlink removals are done before
the of_node destruction, synchronize the of_changeset_destroy() with the
devlink removals. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: core: Release rproc->clean_table after rproc_attach() fails
When rproc->state = RPROC_DETACHED is attached to remote processor
through rproc_attach(), if rproc_handle_resources() returns failure,
then the clean table should be released, otherwise the following
memory leak will occur.
unreferenced object 0xffff000086a99800 (size 1024):
comm "kworker/u12:3", pid 59, jiffies 4294893670 (age 121.140s)
hex dump (first 32 bytes):
00 00 00 00 00 80 00 00 00 00 00 00 00 00 10 00 ............
00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 ............
backtrace:
[<000000008bbe4ca8>] slab_post_alloc_hook+0x98/0x3fc
[<000000003b8a272b>] __kmem_cache_alloc_node+0x13c/0x230
[<000000007a507c51>] __kmalloc_node_track_caller+0x5c/0x260
[<0000000037818dae>] kmemdup+0x34/0x60
[<00000000610f7f57>] rproc_boot+0x35c/0x56c
[<0000000065f8871a>] rproc_add+0x124/0x17c
[<00000000497416ee>] imx_rproc_probe+0x4ec/0x5d4
[<000000003bcaa37d>] platform_probe+0x68/0xd8
[<00000000771577f9>] really_probe+0x110/0x27c
[<00000000531fea59>] __driver_probe_device+0x78/0x12c
[<0000000080036a04>] driver_probe_device+0x3c/0x118
[<000000007e0bddcb>] __device_attach_driver+0xb8/0xf8
[<000000000cf1fa33>] bus_for_each_drv+0x84/0xe4
[<000000001a53b53e>] __device_attach+0xfc/0x18c
[<00000000d1a2a32c>] device_initial_probe+0x14/0x20
[<00000000d8f8b7ae>] bus_probe_device+0xb0/0xb4
unreferenced object 0xffff0000864c9690 (size 16): |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: core: Cleanup acquired resources when rproc_handle_resources() fails in rproc_attach()
When rproc->state = RPROC_DETACHED and rproc_attach() is used
to attach to the remote processor, if rproc_handle_resources()
returns a failure, the resources allocated by imx_rproc_prepare()
should be released, otherwise the following memory leak will occur.
Since almost the same thing is done in imx_rproc_prepare() and
rproc_resource_cleanup(), Function rproc_resource_cleanup() is able
to deal with empty lists so it is better to fix the "goto" statements
in rproc_attach(). replace the "unprepare_device" goto statement with
"clean_up_resources" and get rid of the "unprepare_device" label.
unreferenced object 0xffff0000861c5d00 (size 128):
comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............
backtrace:
[<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c
[<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0
[<00000000521c0345>] kmalloc_trace+0x40/0x158
[<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8
[<000000002815755e>] imx_rproc_prepare+0xe0/0x180
[<0000000003f61b4e>] rproc_boot+0x2ec/0x528
[<00000000e7e994ac>] rproc_add+0x124/0x17c
[<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4
[<00000000efc298a1>] platform_probe+0x68/0xd8
[<00000000110be6fe>] really_probe+0x110/0x27c
[<00000000e245c0ae>] __driver_probe_device+0x78/0x12c
[<00000000f61f6f5e>] driver_probe_device+0x3c/0x118
[<00000000a7874938>] __device_attach_driver+0xb8/0xf8
[<0000000065319e69>] bus_for_each_drv+0x84/0xe4
[<00000000db3eb243>] __device_attach+0xfc/0x18c
[<0000000072e4e1a4>] device_initial_probe+0x14/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix potential "struct net" leak in inet6_rtm_getaddr()
It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
pipe: wakeup wr_wait after setting max_usage
Commit c73be61cede5 ("pipe: Add general notification queue support") a
regression was introduced that would lock up resized pipes under certain
conditions. See the reproducer in [1].
The commit resizing the pipe ring size was moved to a different
function, doing that moved the wakeup for pipe->wr_wait before actually
raising pipe->max_usage. If a pipe was full before the resize occured it
would result in the wakeup never actually triggering pipe_write.
Set @max_usage and @nr_accounted before waking writers if this isn't a
watch queue.
[Christian Brauner <brauner@kernel.org>: rewrite to account for watch queues] |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: virtio: Free driver_override when rpmsg_remove()
Free driver_override when rpmsg_remove(), otherwise
the following memory leak will occur:
unreferenced object 0xffff0000d55d7080 (size 128):
comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s)
hex dump (first 32 bytes):
72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00 rpmsg_ns........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320
[<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70
[<00000000228a60c3>] kstrndup+0x4c/0x90
[<0000000077158695>] driver_set_override+0xd0/0x164
[<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170
[<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30
[<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec
[<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280
[<00000000443331cc>] really_probe+0xbc/0x2dc
[<00000000391064b1>] __driver_probe_device+0x78/0xe0
[<00000000a41c9a5b>] driver_probe_device+0xd8/0x160
[<000000009c3bd5df>] __device_attach_driver+0xb8/0x140
[<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4
[<000000003b929a36>] __device_attach+0x9c/0x19c
[<00000000a94e0ba8>] device_initial_probe+0x14/0x20
[<000000003c999637>] bus_probe_device+0xa0/0xac |
| Due to a firewall misconfiguration, Kerlink devices running KerOS prior to 5.12 incorrectly accept specially crafted UDP packets. This allows an attacker to bypass the firewall and access UDP-based services that would otherwise be protected. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pvrusb2: fix memory leak in pvr_probe
The error handling code in pvr2_hdw_create forgets to unregister the
v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create,
it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL,
which leads to that pvr2_hdw_destroy directly returns.
Fix this by adding v4l2_device_unregister to decrease the refcount of
usb interface. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix small mempool leak in SMB2_negotiate()
In some cases of failure (dialect mismatches) in SMB2_negotiate(), after
the request is sent, the checks would return -EIO when they should be
rather setting rc = -EIO and jumping to neg_exit to free the response
buffer from mempool. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: fix potential memleak in 'add_widget_node'
As 'kobject_add' may allocated memory for 'kobject->name' when return error.
And in this function, if call 'kobject_add' failed didn't free kobject.
So call 'kobject_put' to recycling resources. |
| In the Linux kernel, the following vulnerability has been resolved:
hugetlbfs: don't delete error page from pagecache
This change is very similar to the change that was made for shmem [1], and
it solves the same problem but for HugeTLBFS instead.
Currently, when poison is found in a HugeTLB page, the page is removed
from the page cache. That means that attempting to map or read that
hugepage in the future will result in a new hugepage being allocated
instead of notifying the user that the page was poisoned. As [1] states,
this is effectively memory corruption.
The fix is to leave the page in the page cache. If the user attempts to
use a poisoned HugeTLB page with a syscall, the syscall will fail with
EIO, the same error code that shmem uses. For attempts to map the page,
the thread will get a BUS_MCEERR_AR SIGBUS.
[1]: commit a76054266661 ("mm: shmem: don't truncate page if memory failure happens") |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init
If the function sdma_load_context() fails, the sdma_desc will be
freed, but the allocated desc->bd is forgot to be freed.
We already met the sdma_load_context() failure case and the log as
below:
[ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready
...
In this case, the desc->bd will not be freed without this change. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: smscufx: fix error handling code in ufx_usb_probe
The current error handling code in ufx_usb_probe have many unmatching
issues, e.g., missing ufx_free_usb_list, destroy_modedb label should
only include framebuffer_release, fb_dealloc_cmap only matches
fb_alloc_cmap.
My local syzkaller reports a memory leak bug:
memory leak in ufx_usb_probe
BUG: memory leak
unreferenced object 0xffff88802f879580 (size 128):
comm "kworker/0:7", pid 17416, jiffies 4295067474 (age 46.710s)
hex dump (first 32 bytes):
80 21 7c 2e 80 88 ff ff 18 d0 d0 0c 80 88 ff ff .!|.............
00 d0 d0 0c 80 88 ff ff e0 ff ff ff 0f 00 00 00 ................
backtrace:
[<ffffffff814c99a0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1045
[<ffffffff824d219c>] kmalloc include/linux/slab.h:553 [inline]
[<ffffffff824d219c>] kzalloc include/linux/slab.h:689 [inline]
[<ffffffff824d219c>] ufx_alloc_urb_list drivers/video/fbdev/smscufx.c:1873 [inline]
[<ffffffff824d219c>] ufx_usb_probe+0x11c/0x15a0 drivers/video/fbdev/smscufx.c:1655
[<ffffffff82d17927>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
[<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
[<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778
[<ffffffff827132da>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:808
[<ffffffff82713c27>] __device_attach_driver+0xf7/0x150 drivers/base/dd.c:936
[<ffffffff82710137>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
[<ffffffff827136b5>] __device_attach+0x105/0x2d0 drivers/base/dd.c:1008
[<ffffffff82711d36>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
[<ffffffff8270e242>] device_add+0x642/0xdc0 drivers/base/core.c:3517
[<ffffffff82d14d5f>] usb_set_configuration+0x8ef/0xb80 drivers/usb/core/message.c:2170
[<ffffffff82d2576c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<ffffffff82d16ffc>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
[<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
[<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778
Fix this bug by rewriting the error handling code in ufx_usb_probe. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.
Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.
So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.
Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling. |
| In the Linux kernel, the following vulnerability has been resolved:
xtensa: Fix refcount leak bug in time.c
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
xtensa: xtfpga: Fix refcount leak bug in setup
In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore. |
