| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper verification of cryptographic signature in Windows Certificates allows an unauthorized attacker to perform spoofing over a network. |
| Evervault is a payment security solution. A vulnerability was identified in the `evervault-go` SDK’s attestation verification logic in versions of `evervault-go` prior to 1.3.2 that may allow incomplete documents to pass validation. This may cause the client to trust an enclave operator that does not meet expected integrity guarantees. The exploitability of this issue is limited in Evervault-hosted environments as an attacker would require the pre-requisite ability to serve requests from specific evervault domain names, following from our ACME challenge based TLS certificate acquisition pipeline. The vulnerability primarily affects applications which only check PCR8. Though the efficacy is also reduced for applications that check all PCR values, the impact is largely remediated by checking PCR 0, 1 and 2. The identified issue has been addressed in version 1.3.2 by validating attestation documents before storing in the cache, and replacing the naive equality checks with a new SatisfiedBy check. Those who useevervault-go to attest Enclaves that are hosted outside of Evervault environments and cannot upgrade have two possible workarounds available. Modify the application logic to fail verification if PCR8 is not explicitly present and non-empty and/or add custom pre-validation to reject documents that omit any required PCRs. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.2 before 18.6.6, 18.7 before 18.7.4, and 18.8 before 18.8.4 that could have allowed an unauthenticated user to steal tokens and access private repositories by abusing incomplete validation in the Web IDE. |
| OpenProject is an open-source, web-based project management software. To enable the real time collaboration on documents, OpenProject 17.0 introduced a synchronization server. The OpenPrioject backend generates an authentication token that is currently valid for 24 hours, encrypts it with a shared secret only known to the synchronization server. The frontend hands this encrypted token and the backend URL over to the synchronization server to check user's ability to work on the document and perform intermittent saves while editing. The synchronization server does not properly validate the backend URL and sends a request with the decrypted authentication token to the endpoint that was given to the server. An attacker could use this vulnerability to decrypt a token that he intercepted by other means to gain an access token to interact with OpenProject on the victim's behalf. This vulnerability was introduced with OpenProject 17.0.0 and was fixed in 17.0.2. As a workaround, disable the collaboration feature via Settings -> Documents -> Real time collaboration -> Disable. Additionally the `hocuspocus` container should also be disabled. |
| OpenProject is an open-source, web-based project management software. In the new editor for collaborative documents based on BlockNote, OpenProject maintainers added a custom extension in OpenProject version 17.0.0 that allows to mention OpenProject work packages in the document. To show work package details, the editor loads details about the work package via the OpenProject API. For this API call, the extension to the BlockNote editor did not properly validate the given work package ID to be only a number. This allowed an attacker to generate a document with relative links that upon opening could make arbitrary `GET` requests to any URL within the OpenProject instance. This issue was patched in version version 0.0.22 of op-blocknote-extensions, which was shipped with OpenProject 17.0.2. If users cannot update immediately to version 17.0.2 of OpenProject, administrators can disable collaborative document editing in Settings -> Documents -> Real time collaboration -> Disable. |
| Certain HP OfficeJet Pro printers may expose information if Cross‑Origin Resource Sharing (CORS) is misconfigured, potentially allowing unauthorized web origins to access device resource.
CORS is disabled by default on Pro‑class devices and can only be enabled by an administrator through the Embedded Web Server (EWS). Keeping CORS disabled unless explicitly required helps ensure that only trusted solutions can interact with the device. |
| Proctorio Chrome Extension is a browser extension used for online proctoring. The extension contains multiple window.addEventListener('message', ...) handlers that do not properly validate the origin of incoming messages. Specifically, an internal messaging bridge processes messages based solely on the presence of a fromWebsite property without verifying the event.origin attribute. |
| A Cross-Origin Resource Sharing (CORS) misconfiguration vulnerability exists in Dify v1.9.1 in the /console/api/setup endpoint. The endpoint implements an insecure CORS policy that reflects any Origin header and enables Access-Control-Allow-Credentials: true, permitting arbitrary external domains to make authenticated requests. NOTE: the Supplier disputes this because the endpoint configuration is intentional to support bootstrap. |
| Windows Enroll Engine Security Feature Bypass Vulnerability |
| Cosign provides code signing and transparency for containers and binaries. Prior to versions 2.6.2 and 3.0.4, Cosign bundle can be crafted to successfully verify an artifact even if the embedded Rekor entry does not reference the artifact's digest, signature or public key. When verifying a Rekor entry, Cosign verifies the Rekor entry signature, and also compares the artifact's digest, the user's public key from either a Fulcio certificate or provided by the user, and the artifact signature to the Rekor entry contents. Without these comparisons, Cosign would accept any response from Rekor as valid. A malicious actor that has compromised a user's identity or signing key could construct a valid Cosign bundle by including any arbitrary Rekor entry, thus preventing the user from being able to audit the signing event. This issue has been patched in versions 2.6.2 and 3.0.4. |
| React Router is a router for React. In @remix-run/server-runtime version prior to 2.17.3. and react-router 7.0.0 through 7.11.0, React Router (or Remix v2) is vulnerable to CSRF attacks on document POST requests to UI routes when using server-side route action handlers in Framework Mode, or when using React Server Actions in the new unstable RSC modes. There is no impact if Declarative Mode (<BrowserRouter>) or Data Mode (createBrowserRouter/<RouterProvider>) is being used. This issue has been patched in @remix-run/server-runtime version 2.17.3 and react-router version 7.12.0. |
| On BIG-IP systems, undisclosed traffic can cause data corruption and unauthorized data modification in protocols which do not have message integrity protection. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Origin validation error vulnerability in BeeDrive in Synology BeeDrive for desktop before 1.4.3-13973 allows local users to write arbitrary files with non-sensitive information via unspecified vectors. |
| An unauthenticated remote attacker is able to use an existing session id of a logged in user and gain full access to the device if configuration via ethernet is enabled. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW-F . An attacker can update the system firmware with a specially crafted image. |
| Issue summary: The 'openssl dgst' command-line tool silently truncates input
data to 16MB when using one-shot signing algorithms and reports success instead
of an error.
Impact summary: A user signing or verifying files larger than 16MB with
one-shot algorithms (such as Ed25519, Ed448, or ML-DSA) may believe the entire
file is authenticated while trailing data beyond 16MB remains unauthenticated.
When the 'openssl dgst' command is used with algorithms that only support
one-shot signing (Ed25519, Ed448, ML-DSA-44, ML-DSA-65, ML-DSA-87), the input
is buffered with a 16MB limit. If the input exceeds this limit, the tool
silently truncates to the first 16MB and continues without signaling an error,
contrary to what the documentation states. This creates an integrity gap where
trailing bytes can be modified without detection if both signing and
verification are performed using the same affected codepath.
The issue affects only the command-line tool behavior. Verifiers that process
the full message using library APIs will reject the signature, so the risk
primarily affects workflows that both sign and verify with the affected
'openssl dgst' command. Streaming digest algorithms for 'openssl dgst' and
library users are unaffected.
The FIPS modules in 3.5 and 3.6 are not affected by this issue, as the
command-line tools are outside the OpenSSL FIPS module boundary.
OpenSSL 3.5 and 3.6 are vulnerable to this issue.
OpenSSL 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| An issue was discovered in Nitro PDF Pro for Windows before 14.42.0.34. In certain cases, it displays signer information from a non-verified PDF field rather than from the verified certificate subject. This could allow a document to present inconsistent signer details. The display logic was updated to ensure signer information consistently reflects the verified certificate identity. |
| A mail spoofing vulnerability in Xerox Workplace Suite allows attackers to forge email headers, making it appear as though messages are sent from trusted sources. |
| Prowise Reflect version 1.0.9 contains a remote keystroke injection vulnerability that allows attackers to send keyboard events through an exposed WebSocket on port 8082. Attackers can craft malicious web pages to inject keystrokes, opening applications and typing arbitrary text by sending specific WebSocket messages. |
