| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In dpe, there is a possible memory corruption due to use after free. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10114696; Issue ID: MSV-4480. |
| In dpe, there is a possible memory corruption due to use after free. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10114835; Issue ID: MSV-4479. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: handle get_client_locked() failure in nfsd4_setclientid_confirm()
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/buffer: fix use-after-free when call bh_read() helper
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch(). |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Also allocate and copy hash for reading of filter files
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free in cifs_oplock_break
A race condition can occur in cifs_oplock_break() leading to a
use-after-free of the cinode structure when unmounting:
cifs_oplock_break()
_cifsFileInfo_put(cfile)
cifsFileInfo_put_final()
cifs_sb_deactive()
[last ref, start releasing sb]
kill_sb()
kill_anon_super()
generic_shutdown_super()
evict_inodes()
dispose_list()
evict()
destroy_inode()
call_rcu(&inode->i_rcu, i_callback)
spin_lock(&cinode->open_file_lock) <- OK
[later] i_callback()
cifs_free_inode()
kmem_cache_free(cinode)
spin_unlock(&cinode->open_file_lock) <- UAF
cifs_done_oplock_break(cinode) <- UAF
The issue occurs when umount has already released its reference to the
superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this
releases the last reference, triggering the immediate cleanup of all
inodes under RCU. However, cifs_oplock_break() continues to access the
cinode after this point, resulting in use-after-free.
Fix this by holding an extra reference to the superblock during the
entire oplock break operation. This ensures that the superblock and
its inodes remain valid until the oplock break completes. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al
Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario.
It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in
proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same
manner. |
| In the Linux kernel, the following vulnerability has been resolved:
net: appletalk: Fix use-after-free in AARP proxy probe
The AARP proxyâprobe routine (aarp_proxy_probe_network) sends a probe,
releases the aarp_lock, sleeps, then re-acquires the lock. During that
window an expire timer thread (__aarp_expire_timer) can remove and
kfree() the same entry, leading to a use-after-free.
race condition:
cpu 0 | cpu 1
atalk_sendmsg() | atif_proxy_probe_device()
aarp_send_ddp() | aarp_proxy_probe_network()
mod_timer() | lock(aarp_lock) // LOCK!!
timeout around 200ms | alloc(aarp_entry)
and then call | proxies[hash] = aarp_entry
aarp_expire_timeout() | aarp_send_probe()
| unlock(aarp_lock) // UNLOCK!!
lock(aarp_lock) // LOCK!! | msleep(100);
__aarp_expire_timer(&proxies[ct]) |
free(aarp_entry) |
unlock(aarp_lock) // UNLOCK!! |
| lock(aarp_lock) // LOCK!!
| UAF aarp_entry !!
==================================================================
BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
Read of size 4 at addr ffff8880123aa360 by task repro/13278
CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc1/0x630 mm/kasan/report.c:521
kasan_report+0xca/0x100 mm/kasan/report.c:634
aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
sock_do_ioctl+0xdc/0x260 net/socket.c:1190
sock_ioctl+0x239/0x6a0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated:
aarp_alloc net/appletalk/aarp.c:382 [inline]
aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468
atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
Freed:
kfree+0x148/0x4d0 mm/slub.c:4841
__aarp_expire net/appletalk/aarp.c:90 [inline]
__aarp_expire_timer net/appletalk/aarp.c:261 [inline]
aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317
The buggy address belongs to the object at ffff8880123aa300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 96 bytes inside of
freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0)
Memory state around the buggy address:
ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Do not allow binding to VMADDR_PORT_ANY
It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can
cause a use-after-free when a connection is made to the bound socket.
The socket returned by accept() also has port VMADDR_PORT_ANY but is not
on the list of unbound sockets. Binding it will result in an extra
refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep
the binding until socket destruction).
Modify the check in __vsock_bind_connectible() to also prevent binding
to VMADDR_PORT_ANY. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: interface: fix use-after-free after changing collect_md xfrm interface
collect_md property on xfrm interfaces can only be set on device creation,
thus xfrmi_changelink() should fail when called on such interfaces.
The check to enforce this was done only in the case where the xi was
returned from xfrmi_locate() which doesn't look for the collect_md
interface, and thus the validation was never reached.
Calling changelink would thus errornously place the special interface xi
in the xfrmi_net->xfrmi hash, but since it also exists in the
xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when
the net namespace was taken down [1].
Change the check to use the xi from netdev_priv which is available earlier
in the function to prevent changes in xfrm collect_md interfaces.
[1] resulting oops:
[ 8.516540] kernel BUG at net/core/dev.c:12029!
[ 8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme #5 PREEMPT(voluntary)
[ 8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 8.516569] Workqueue: netns cleanup_net
[ 8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0
[ 8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24
[ 8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206
[ 8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60
[ 8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122
[ 8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100
[ 8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00
[ 8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00
[ 8.516615] FS: 0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000
[ 8.516619] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0
[ 8.516625] PKRU: 55555554
[ 8.516627] Call Trace:
[ 8.516632] <TASK>
[ 8.516635] ? rtnl_is_locked+0x15/0x20
[ 8.516641] ? unregister_netdevice_queue+0x29/0xf0
[ 8.516650] ops_undo_list+0x1f2/0x220
[ 8.516659] cleanup_net+0x1ad/0x2e0
[ 8.516664] process_one_work+0x160/0x380
[ 8.516673] worker_thread+0x2aa/0x3c0
[ 8.516679] ? __pfx_worker_thread+0x10/0x10
[ 8.516686] kthread+0xfb/0x200
[ 8.516690] ? __pfx_kthread+0x10/0x10
[ 8.516693] ? __pfx_kthread+0x10/0x10
[ 8.516697] ret_from_fork+0x82/0xf0
[ 8.516705] ? __pfx_kthread+0x10/0x10
[ 8.516709] ret_from_fork_asm+0x1a/0x30
[ 8.516718] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free in crypt_message when using async crypto
The CVE-2024-50047 fix removed asynchronous crypto handling from
crypt_message(), assuming all crypto operations are synchronous.
However, when hardware crypto accelerators are used, this can cause
use-after-free crashes:
crypt_message()
// Allocate the creq buffer containing the req
creq = smb2_get_aead_req(..., &req);
// Async encryption returns -EINPROGRESS immediately
rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req);
// Free creq while async operation is still in progress
kvfree_sensitive(creq, ...);
Hardware crypto modules often implement async AEAD operations for
performance. When crypto_aead_encrypt/decrypt() returns -EINPROGRESS,
the operation completes asynchronously. Without crypto_wait_req(),
the function immediately frees the request buffer, leading to crashes
when the driver later accesses the freed memory.
This results in a use-after-free condition when the hardware crypto
driver later accesses the freed request structure, leading to kernel
crashes with NULL pointer dereferences.
The issue occurs because crypto_alloc_aead() with mask=0 doesn't
guarantee synchronous operation. Even without CRYPTO_ALG_ASYNC in
the mask, async implementations can be selected.
Fix by restoring the async crypto handling:
- DECLARE_CRYPTO_WAIT(wait) for completion tracking
- aead_request_set_callback() for async completion notification
- crypto_wait_req() to wait for operation completion
This ensures the request buffer isn't freed until the crypto operation
completes, whether synchronous or asynchronous, while preserving the
CVE-2024-50047 fix. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with
iio_for_each_active_channel()) without making sure the indio_dev
stays in buffer mode.
There is a race if indio_dev exits buffer mode in the middle of the
interrupt that flushes the fifo. Fix this by calling
synchronize_irq() to ensure that no interrupt is currently running when
disabling buffer mode.
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[...]
_find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290
fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178
fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c
irq_thread_fn from irq_thread+0x110/0x1f4
irq_thread from kthread+0xe0/0xfc
kthread from ret_from_fork+0x14/0x2c |
| FontForge SFD File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of SFD files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28564. |
| FontForge SFD File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of SFD files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28525. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix use-after-free due to race with dev replace
While loading a zone's info during creation of a block group, we can race
with a device replace operation and then trigger a use-after-free on the
device that was just replaced (source device of the replace operation).
This happens because at btrfs_load_zone_info() we extract a device from
the chunk map into a local variable and then use the device while not
under the protection of the device replace rwsem. So if there's a device
replace operation happening when we extract the device and that device
is the source of the replace operation, we will trigger a use-after-free
if before we finish using the device the replace operation finishes and
frees the device.
Fix this by enlarging the critical section under the protection of the
device replace rwsem so that all uses of the device are done inside the
critical section. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Fix use-after-free on a dentry's dname.name
->d_name.name can change on rename and the earlier value can be freed;
there are conditions sufficient to stabilize it (->d_lock on dentry,
->d_lock on its parent, ->i_rwsem exclusive on the parent's inode,
rename_lock), but none of those are met at any of the sites. Take a stable
snapshot of the name instead. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: add missing locking around taking dentry fid list
Fix a use-after-free on dentry's d_fsdata fid list when a thread
looks up a fid through dentry while another thread unlinks it:
UAF thread:
refcount_t: addition on 0; use-after-free.
p9_fid_get linux/./include/net/9p/client.h:262
v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129
v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181
v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314
v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400
vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248
Freed by:
p9_fid_destroy (inlined)
p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456
p9_fid_put linux/./include/net/9p/client.h:278
v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55
v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518
vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335
The problem is that d_fsdata was not accessed under d_lock, because
d_release() normally is only called once the dentry is otherwise no
longer accessible but since we also call it explicitly in v9fs_remove
that lock is required:
move the hlist out of the dentry under lock then unref its fids once
they are no longer accessible. |
| An issue was discovered in Foxit PDF and Editor for Windows and macOS before 13.2 and 2025 before 2025.2. A crafted PDF can contain JavaScript that attaches an OnBlur action on a form field that destroys an annotation. During user right-click interaction, the program's internal focus change handling prematurely releases the annotation object, resulting in a use-after-free vulnerability that may cause memory corruption or application crashes. |
| An issue was discovered in Foxit PDF and Editor for Windows before 13.2 and 2025 before 2025.2. A crafted PDF containing JavaScript that calls closeDoc() while internal objects are still in use can cause premature release of these objects. This use-after-free vulnerability may lead to memory corruption, potentially resulting in information disclosure when the PDF is opened. |
| Use After Free vulnerability was discovered in fs/vfs/fs_rename code of the Apache NuttX RTOS, that due recursive implementation and single buffer use by two different pointer variables allowed arbitrary user provided size buffer reallocation and write to the previously freed heap chunk, that in specific cases could cause unintended virtual filesystem rename/move operation results.
This issue affects Apache NuttX RTOS: from 7.20 before 12.11.0.
Users of virtual filesystem based services with write access especially when exposed over the network (i.e. FTP) are affected and recommended to upgrade to version 12.11.0 that fixes the issue. |
