| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the GLib Base64 encoding routine when processing very large input data. Due to incorrect use of integer types during length calculation, the library may miscalculate buffer boundaries. This can cause memory writes outside the allocated buffer. Applications that process untrusted or extremely large Base64 input using GLib may crash or behave unpredictably. |
| The postjournal service in Zimbra Collaboration (ZCS) before 8.8.15 Patch 46, 9 before 9.0.0 Patch 41, 10 before 10.0.9, and 10.1 before 10.1.1 sometimes allows unauthenticated users to execute commands. |
| Webgrind 1.1 contains a remote command execution vulnerability that allows unauthenticated attackers to inject OS commands via the dataFile parameter in index.php. Attackers can execute arbitrary system commands by manipulating the dataFile parameter, such as using payload '0%27%26calc.exe%26%27' to execute commands on the target system. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
The function lio_target_nacl_info_show() uses sprintf() in a loop to print
details for every iSCSI connection in a session without checking for the
buffer length. With enough iSCSI connections it's possible to overflow the
buffer provided by configfs and corrupt the memory.
This patch replaces sprintf() with sysfs_emit_at() that checks for buffer
boundries. |
| Cursor is a code editor built for programming with AI. Prior to 2.3, hen the Cursor Agent is running in Auto-Run Mode with Allowlist mode enabled, certain shell built-ins can still be executed without appearing in the allowlist and without requiring user approval.
This allows an attacker via indirect or direct prompt injection to poison the shell environment by setting, modifying, or removing environment variables that influence trusted commands. This vulnerability is fixed in 2.3. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[]. |
| RaspAP raspap-webgui versions prior to 3.3.6 contain an OS command injection vulnerability. If exploited, an arbitrary OS command may be executed by a user who can log in to the product. |
| A segmentation violation in the oneflow.logical_or component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix untrusted unsigned subtract
Fix the following Smatch static checker warning:
net/rxrpc/rxgk_app.c:65 rxgk_yfs_decode_ticket()
warn: untrusted unsigned subtract. 'ticket_len - 10 * 4'
by prechecking the length of what we're trying to extract in two places in
the token and decoding for a response packet.
Also use sizeof() on the struct we're extracting rather specifying the size
numerically to be consistent with the other related statements. |
| OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B". |
| Stack-based buffer overflow in libtasn1 version: v4.20.0. The function fails to validate the size of input data resulting in a buffer overflow in asn1_expend_octet_string. |
| llama.cpp is an inference of several LLM models in C/C++. In commits 55d4206c8 and prior, the n_discard parameter is parsed directly from JSON input in the llama.cpp server's completion endpoints without validation to ensure it's non-negative. When a negative value is supplied and the context fills up, llama_memory_seq_rm/add receives a reversed range and negative offset, causing out-of-bounds memory writes in the token evaluation loop. This deterministic memory corruption can crash the process or enable remote code execution (RCE). There is no fix at the time of publication. |
| Issue summary: PBMAC1 parameters in PKCS#12 files are missing validation
which can trigger a stack-based buffer overflow, invalid pointer or NULL
pointer dereference during MAC verification.
Impact summary: The stack buffer overflow or NULL pointer dereference may
cause a crash leading to Denial of Service for an application that parses
untrusted PKCS#12 files. The buffer overflow may also potentially enable
code execution depending on platform mitigations.
When verifying a PKCS#12 file that uses PBMAC1 for the MAC, the PBKDF2
salt and keylength parameters from the file are used without validation.
If the value of keylength exceeds the size of the fixed stack buffer used
for the derived key (64 bytes), the key derivation will overflow the buffer.
The overflow length is attacker-controlled. Also, if the salt parameter is
not an OCTET STRING type this can lead to invalid or NULL pointer
dereference.
Exploiting this issue requires a user or application to process
a maliciously crafted PKCS#12 file. It is uncommon to accept untrusted
PKCS#12 files in applications as they are usually used to store private
keys which are trusted by definition. For this reason the issue was assessed
as Moderate severity.
The FIPS modules in 3.6, 3.5 and 3.4 are not affected by this issue, as
PKCS#12 processing is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5 and 3.4 are vulnerable to this issue.
OpenSSL 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue as they do
not support PBMAC1 in PKCS#12. |
| Issue summary: A TLS 1.3 connection using certificate compression can be
forced to allocate a large buffer before decompression without checking
against the configured certificate size limit.
Impact summary: An attacker can cause per-connection memory allocations of
up to approximately 22 MiB and extra CPU work, potentially leading to
service degradation or resource exhaustion (Denial of Service).
In affected configurations, the peer-supplied uncompressed certificate
length from a CompressedCertificate message is used to grow a heap buffer
prior to decompression. This length is not bounded by the max_cert_list
setting, which otherwise constrains certificate message sizes. An attacker
can exploit this to cause large per-connection allocations followed by
handshake failure. No memory corruption or information disclosure occurs.
This issue only affects builds where TLS 1.3 certificate compression is
compiled in (i.e., not OPENSSL_NO_COMP_ALG) and at least one compression
algorithm (brotli, zlib, or zstd) is available, and where the compression
extension is negotiated. Both clients receiving a server CompressedCertificate
and servers in mutual TLS scenarios receiving a client CompressedCertificate
are affected. Servers that do not request client certificates are not
vulnerable to client-initiated attacks.
Users can mitigate this issue by setting SSL_OP_NO_RX_CERTIFICATE_COMPRESSION
to disable receiving compressed certificates.
The FIPS modules in 3.6, 3.5, 3.4 and 3.3 are not affected by this issue,
as the TLS implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4 and 3.3 are vulnerable to this issue.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| Issue summary: Writing large, newline-free data into a BIO chain using the
line-buffering filter where the next BIO performs short writes can trigger
a heap-based out-of-bounds write.
Impact summary: This out-of-bounds write can cause memory corruption which
typically results in a crash, leading to Denial of Service for an application.
The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in
TLS/SSL data paths. In OpenSSL command-line applications, it is typically
only pushed onto stdout/stderr on VMS systems. Third-party applications that
explicitly use this filter with a BIO chain that can short-write and that
write large, newline-free data influenced by an attacker would be affected.
However, the circumstances where this could happen are unlikely to be under
attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated
data controlled by an attacker. For that reason the issue was assessed as
Low severity.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the BIO implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously
crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing
non-ASCII BMP code point can trigger a one byte write before the allocated
buffer.
Impact summary: The out-of-bounds write can cause a memory corruption
which can have various consequences including a Denial of Service.
The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12
BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes,
the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16
source byte count as the destination buffer capacity to UTF8_putc(). For BMP
code points above U+07FF, UTF-8 requires three bytes, but the forwarded
capacity can be just two bytes. UTF8_putc() then returns -1, and this negative
value is added to the output length without validation, causing the
length to become negative. The subsequent trailing NUL byte is then written
at a negative offset, causing write outside of heap allocated buffer.
The vulnerability is reachable via the public PKCS12_get_friendlyname() API
when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a
different code path that avoids this issue, PKCS12_get_friendlyname() directly
invokes the vulnerable function. Exploitation requires an attacker to provide
a malicious PKCS#12 file to be parsed by the application and the attacker
can just trigger a one zero byte write before the allocated buffer.
For that reason the issue was assessed as Low severity according to our
Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| Hasura GraphQL 1.3.3 contains a remote code execution vulnerability that allows attackers to execute arbitrary shell commands through SQL query manipulation. Attackers can inject commands into the run_sql endpoint by crafting malicious GraphQL queries that execute system commands through PostgreSQL's COPY FROM PROGRAM functionality. |
| Mini Mouse 9.2.0 contains a remote code execution vulnerability that allows attackers to execute arbitrary commands through an unauthenticated HTTP endpoint. Attackers can leverage the /op=command endpoint to download and execute payloads by sending crafted JSON requests with malicious script commands. |
| NVIDIA NSIGHT Graphics for Linux contains a vulnerability where an attacker could cause command injection. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, and denial of service. |
| NVIDIA Nsight Systems for Linux contains a vulnerability in the .run installer, where an attacker could cause an OS command injection by supplying a malicious string to the installation path. A successful exploit of this vulnerability might lead to escalation of privileges, code execution, data tampering, denial of service, and information disclosure. |
