| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: properly keep track of conduit reference
Problem description
-------------------
DSA has a mumbo-jumbo of reference handling of the conduit net device
and its kobject which, sadly, is just wrong and doesn't make sense.
There are two distinct problems.
1. The OF path, which uses of_find_net_device_by_node(), never releases
the elevated refcount on the conduit's kobject. Nominally, the OF and
non-OF paths should result in objects having identical reference
counts taken, and it is already suspicious that
dsa_dev_to_net_device() has a put_device() call which is missing in
dsa_port_parse_of(), but we can actually even verify that an issue
exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command
"before" and "after" applying this patch:
(unbind the conduit driver for net device eno2)
echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
we see these lines in the output diff which appear only with the patch
applied:
kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000)
kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000)
2. After we find the conduit interface one way (OF) or another (non-OF),
it can get unregistered at any time, and DSA remains with a long-lived,
but in this case stale, cpu_dp->conduit pointer. Holding the net
device's underlying kobject isn't actually of much help, it just
prevents it from being freed (but we never need that kobject
directly). What helps us to prevent the net device from being
unregistered is the parallel netdev reference mechanism (dev_hold()
and dev_put()).
Actually we actually use that netdev tracker mechanism implicitly on
user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with
the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link().
But time still passes at DSA switch probe time between the initial
of_find_net_device_by_node() code and the user port creation time, time
during which the conduit could unregister itself and DSA wouldn't know
about it.
So we have to run of_find_net_device_by_node() under rtnl_lock() to
prevent that from happening, and release the lock only with the netdev
tracker having acquired the reference.
Do we need to keep the reference until dsa_unregister_switch() /
dsa_switch_shutdown()?
1: Maybe yes. A switch device will still be registered even if all user
ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not
make user port errors fatal"), and the cpu_dp->conduit pointers
remain valid. I haven't audited all call paths to see whether they
will actually use the conduit in lack of any user port, but if they
do, it seems safer to not rely on user ports for that reference.
2. Definitely yes. We support changing the conduit which a user port is
associated to, and we can get into a situation where we've moved all
user ports away from a conduit, thus no longer hold any reference to
it via the net device tracker. But we shouldn't let it go nonetheless
- see the next change in relation to dsa_tree_find_first_conduit()
and LAG conduits which disappear.
We have to be prepared to return to the physical conduit, so the CPU
port must explicitly keep another reference to it. This is also to
say: the user ports and their CPU ports may not always keep a
reference to the same conduit net device, and both are needed.
As for the conduit's kobject for the /sys/class/net/ entry, we don't
care about it, we can release it as soon as we hold the net device
object itself.
History and blame attribution
-----------------------------
The code has been refactored so many times, it is very difficult to
follow and properly attribute a blame, but I'll try to make a short
history which I hope to be correct.
We have two distinct probing paths:
- one for OF, introduced in 2016 i
---truncated--- |
| A flaw was found in the X.org server. Due to improperly tracked allocation size in _XkbSetCompatMap, a local attacker may be able to trigger a buffer overflow condition via a specially crafted payload, leading to denial of service or local privilege escalation in distributions where the X.org server is run with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory and information leak in smb3_reconfigure()
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could use the Python Code node to escape the sandbox. The sandbox did not sufficiently restrict access to certain built-in Python objects, allowing an attacker to exfiltrate file contents or achieve RCE. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only., and/or disable the Code node by adding `n8n-nodes-base.code` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix refcount leak when invalid session is found on session lookup
When a session is found but its state is not SMB2_SESSION_VALID, It
indicates that no valid session was found, but it is missing to decrement
the reference count acquired by the session lookup, which results in
a reference count leak. This patch fixes the issue by explicitly calling
ksmbd_user_session_put to release the reference to the session. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could exploit a vulnerability in the JavaScript Task Runner sandbox to execute arbitrary code outside the sandbox boundary. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or use external runner mode (`N8N_RUNNERS_MODE=external`) to limit the blast radius. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: correctly handle io_poll_add() return value on update
When the core of io_uring was updated to handle completions
consistently and with fixed return codes, the POLL_REMOVE opcode
with updates got slightly broken. If a POLL_ADD is pending and
then POLL_REMOVE is used to update the events of that request, if that
update causes the POLL_ADD to now trigger, then that completion is lost
and a CQE is never posted.
Additionally, ensure that if an update does cause an existing POLL_ADD
to complete, that the completion value isn't always overwritten with
-ECANCELED. For that case, whatever io_poll_add() set the value to
should just be retained. |
| An out-of-bounds memory access flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user generates a malicious (too big) networking packet when napi frags is enabled. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, a second-order expression injection vulnerability existed in n8n's Form nodes that could allow an unauthenticated attacker to inject and evaluate arbitrary n8n expressions by submitting crafted form data. When chained with an expression sandbox escape, this could escalate to remote code execution on the n8n host. The vulnerability requires a specific workflow configuration to be exploitable. First, a form node with a field interpolating a value provided by an unauthenticated user, e.g. a form submitted value. Second, the field value must begin with an `=` character, which caused n8n to treat it as an expression and triggered a double-evaluation of the field content. There is no practical reason for a workflow designer to prefix a field with `=` intentionally — the character is not rendered in the output, so the result would not match the designer's expectations. If added accidentally, it would be noticeable and very unlikely to persist. An unauthenticated attacker would need to either know about this specific circumstance on a target instance or discover a matching form by chance. Even when the preconditions are met, the expression injection alone is limited to data accessible within the n8n expression context. Escalation to remote code execution requires chaining with a separate sandbox escape vulnerability. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Review usage of form nodes manually for above mentioned preconditions, disable the Form node by adding `n8n-nodes-base.form` to the `NODES_EXCLUDE` environment variable, and/or disable the Form Trigger node by adding `n8n-nodes-base.formTrigger` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: restore destructor on submit failure
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix a memory leak in tpm2_load_cmd
'tpm2_load_cmd' allocates a tempoary blob indirectly via 'tpm2_key_decode'
but it is not freed in the failure paths. Address this by wrapping the blob
into with a cleanup helper. |
| Storybook is a frontend workshop for building user interface components and pages in isolation. Prior to versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10, the WebSocket functionality in Storybook's dev server, used to create and update stories, is vulnerable to WebSocket hijacking. This vulnerability only affects the Storybook dev server; production builds are not impacted. Exploitation requires a developer to visit a malicious website while their local Storybook dev server is running. Because the WebSocket connection does not validate the origin of incoming connections, a malicious site can silently send WebSocket messages to the local instance without any further user interaction. If the Storybook dev server is intentionally exposed publicly (e.g. for design reviews or stakeholder demos) the risk is higher, as no malicious site visit is required. Any unauthenticated attacker can send WebSocket messages to it directly. The vulnerability affects the WebSocket message handlers for creating and saving stories. Both are vulnerable to injection via unsanitized input in the componentFilePath field, which can be exploited to achieve persistent XSS or Remote Code Execution (RCE). Versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10 contain a fix for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix leaked ct in error paths
There are some situations where ct might be leaked as error paths are
skipping the refcounted check and return immediately. In order to solve
it make sure that the check is always called. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: phy: isp1301: fix non-OF device reference imbalance
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, the restoreConfig function in vikunja/pkg/modules/dump/restore.go of the go-vikunja/vikunja repository fails to sanitize file paths within the provided ZIP archive. A maliciously crafted ZIP can bypass the intended extraction directory to overwrite arbitrary files on the host system. Additionally, we’ve discovered that a malformed archive triggers a runtime panic, crashing the process immediately after the database has been wiped permanently. The application trusts the metadata in the ZIP archive. It uses the Name attribute of the zip.File struct directly in os.OpenFile calls without validation, allowing files to be written outside the intended directory. The restoration logic assumes a specific directory structure within the ZIP. When provided with a "minimalist" malicious ZIP, the application fails to validate the length of slices derived from the archive contents. Specifically, at line 154, the code attempts to access an index of len(ms)-2 on an insufficiently populated slice, triggering a panic. Version 2.0.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
| TinyWeb is a web server (HTTP, HTTPS) written in Delphi for Win32. A vulnerability in versions prior to 2.01 allows unauthenticated remote attackers to bypass the web server's CGI parameter security controls. Depending on the server configuration and the specific CGI executable in use, the impact is either source code disclosure or remote code execution (RCE). Anyone hosting CGI scripts (particularly interpreted languages like PHP) using vulnerable versions of TinyWeb is impacted. The problem has been patched in version 2.01. If upgrading is not immediately possible, ensure `STRICT_CGI_PARAMS` is enabled (it is defined by default in `define.inc`) and/or do not use CGI executables that natively accept dangerous command-line flags (such as `php-cgi.exe`). If hosting PHP, consider placing the server behind a Web Application Firewall (WAF) that explicitly blocks URL query string parameters that begin with a hyphen (`-`) or contain encoded double quotes (`%22`). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: always drop device refcount in ib_del_sub_device_and_put()
Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add
support to add/delete a sub IB device through netlink") grabs a reference
using ib_device_get_by_index() before calling ib_del_sub_device_and_put(),
we need to drop that reference before returning -EOPNOTSUPP error. |
| n8n is an open source workflow automation platform. Prior to versions 2.2.0 and 1.123.8, an authenticated user with permission to create or modify workflows could chain the Read/Write Files from Disk node with git operations to achieve remote code execution. By writing to specific configuration files and then triggering a git operation, the attacker could execute arbitrary shell commands on the n8n host. The issue has been fixed in n8n versions 2.2.0 and 1.123.8. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Read/Write Files from Disk node by adding `n8n-nodes-base.readWriteFile` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: ensure worker is torn down
When an IRQ worker is running, unplugging the device would cause a
crash. The sealevel hardware this driver was written for was not
hotpluggable, so I never realized it.
This change uses a spinlock to protect a list of workers, which
it tears down on disconnect. |
