| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hydra is a layer-two scalability solution for Cardano. Prior to version 0.22.0, the process assumes L1 event finality and does not consider failed transactions. Currently, Cardano L1 is monitored for certain events which are necessary for state progression. At the moment, Hydra considers those events as finalized as soon as they are recognized by the node participants making such transactions the target of re-org attacks. The system does not currently consider the fact that failed transactions on the Cardano L1 can indeed appear in blocks because these transactions are so infrequent. This issue has been patched in version 0.22.0. |
| Nullsoft Scriptable Install System (NSIS) before 3.11 on Windows allows local users to escalate privileges to SYSTEM during an installation, because the temporary plugins directory is created under %WINDIR%\temp and unprivileged users can place a crafted executable file by winning a race condition. This occurs because EW_CREATEDIR does not always set the CreateRestrictedDirectory error flag. |
| An issue was discovered in Artifex Ghostscript before 10.03.1. psi/zmisc1.c, when SAFER mode is used, allows eexec seeds other than the Type 1 standard. |
| An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. DTLS servers allow remote attackers to reuse the same epoch number within two times the TCP maximum segment lifetime, which is prohibited in RFC6347. This vulnerability allows remote attackers to obtain sensitive application (data of connected clients). |
| An assertion failure discovered in in check_certificate_request() in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers to cause a denial of service. |
| An issue was discovered in Contiki-NG tinyDTLS through 2018-08-30. One incorrect handshake could complete with different epoch numbers in the packets Client_Hello, Client_key_exchange, and Change_cipher_spec, which may cause denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: remove BUG() after failure to insert delayed dir index item
Instead of calling BUG() when we fail to insert a delayed dir index item
into the delayed node's tree, we can just release all the resources we
have allocated/acquired before and return the error to the caller. This is
fine because all existing call chains undo anything they have done before
calling btrfs_insert_delayed_dir_index() or BUG_ON (when creating pending
snapshots in the transaction commit path).
So remove the BUG() call and do proper error handling.
This relates to a syzbot report linked below, but does not fix it because
it only prevents hitting a BUG(), it does not fix the issue where somehow
we attempt to use twice the same index number for different index items. |
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based, unauthenticated attacker to cause rpd to crash, leading to Denial of Service (DoS).
On all Junos OS and Junos OS Evolved platforms, when NETCONF and gRPC are enabled, and a specific query is executed via Dynamic Rendering (DREND), rpd will crash and restart. Continuous execution of this specific query will cause a sustained Denial of Service (DoS) condition.
This issue affects:
Juniper Networks Junos OS
* 22.2 versions earlier than 22.2R2-S2, 22.2R3;
* 22.3 versions earlier than 22.3R2, 22.3R3.
Juniper Networks Junos OS Evolved
* 22.2 versions earlier than 22.2R2-S2-EVO, 22.2R3-EVO;
* 22.3 versions earlier than 22.3R2-EVO, 22.3R3-EVO.
This issue does not affect Juniper Networks:
Junos OS versions earlier than 22.2R1;
Junos OS Evolved versions earlier than 22.2R1-EVO.
|
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in the kernel of Juniper Network Junos OS on MX Series allows a network based attacker with low privileges to cause a denial of service.
If a scaled configuration for Source class usage (SCU) / destination class usage (DCU) (more than 10 route classes) is present and the SCU/DCU statistics are gathered by executing specific SNMP requests or CLI commands, a 'vmcore' for the RE kernel will be seen which leads to a device restart. Continued exploitation of this issue will lead to a sustained DoS.
This issue only affects MX Series devices with MPC10, MPC11 or LC9600, and MX304. No other MX Series devices are affected.
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3;
* 22.1 versions earlier than 22.1R3;
* 22.2 versions earlier than 22.2R2;
* 22.3 versions earlier than 22.3R2.
|
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in Juniper DHCP Daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause the jdhcpd to consume all the CPU cycles resulting in a Denial of Service (DoS).
On Junos OS devices with forward-snooped-client configured, if an attacker sends a specific DHCP packet to a non-configured interface, this will cause an infinite loop. The DHCP process will have to be restarted to recover the service.
This issue affects:
Juniper Networks Junos OS
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3;
* 23.2 versions earlier than 23.2R2.
|
| sys/netinet/tcp_timer.h in FreeBSD before 7.0 contains a denial-of-service (DoS) vulnerability due to improper handling of TSopt on TCP connections. NOTE: This vulnerability only affects products that are no longer supported by the maintainer |
| The Gallery Plugin for WordPress – Envira Photo Gallery plugin for WordPress is vulnerable to unauthorized modification of data due to an improper capability check on the 'envira_gallery_insert_images' function in all versions up to, and including, 1.8.7.1. This makes it possible for authenticated attackers, with contributor access and above, to modify galleries on other users' posts. |
| Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. Vyper compiler allows passing a value in builtin raw_call even if the call is a delegatecall or a staticcall. But in the context of delegatecall and staticcall the handling of value is not possible due to the semantics of the respective opcodes, and vyper will silently ignore the value= argument. If the semantics of the EVM are unknown to the developer, he could suspect that by specifying the `value` kwarg, exactly the given amount will be sent along to the target. This vulnerability affects 0.3.10 and earlier versions. |
| An improper exception check in Palo Alto Networks Prisma Access Browser allows a low privileged user to prevent Prisma Access Browser from applying it's Policy Rules. This enables the user to use Prisma Access Browser without any restrictions. |
| An issue discovered in skycaiji 2.8 allows attackers to run arbitrary code via crafted POST request to /index.php?s=/admin/develop/editor_save. |
| An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. DTLS servers mishandle the early use of a large epoch number. This vulnerability allows remote attackers to cause a denial of service and false-positive packet drops. |
| Mocodo Mocodo Online 4.2.6 and below is vulnerable to Remote Code Execution via /web/rewrite.php. |
| The AppPresser plugin for WordPress is vulnerable to improper missing encryption exception handling on the 'decrypt_value' and on the 'doCookieAuth' functions in all versions up to, and including, 4.3.2. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they previously used the login via the plugin API. This can only be exploited if the 'openssl' php extension is not loaded on the server. |
| The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to improper missing encryption exception handling on the 'fea_encrypt' function in all versions up to, and including, 3.19.4. This makes it possible for unauthenticated attackers to manipulate the user processing forms, which can be used to add and edit administrator user for privilege escalation, or to automatically log in users for authentication bypass, or manipulate the post processing form that can be used to inject arbitrary web scripts. This can only be exploited if the 'openssl' php extension is not loaded on the server. |
| The Calculated Fields Form plugin for WordPress is vulnerable to HTML Injection in all versions up to, and including, 5.2.45. This is due to the plugin not properly neutralizing HTML elements from submitted forms. This makes it possible for unauthenticated attackers to inject arbitrary HTML that will render when the administrator views form submissions in their email. |
